Transmission Selection for Vision Inspection Turntables

NT200-10 + 400W Servo, Check Turntable Diameter, Load Distribution, Offset Load, Positioning Angle, Acceleration Time & Cycle Time.

Example ModelNT200-10

Motor Power400W Example

Key ParametersOverturning Moment / Inertia / Offset Load

Cycle TimePositioning Angle + Acceleration Time

WORKING CONDITIONS

What Matters Most When Selecting for This Application?

Total weight alone is insufficient for a vision turntable, Consider Load Radius, Center of Gravity & Offset Load Position.
The shorter the positioning time, Acceleration/Deceleration Torque Increases, Check Rotational Inertia & Peak Torque.
Hollow tables suit camera systems, Cables, Pneumatic Lines through the Center, Reduces External Cable-Chain Interference.

NT200-10

400W Servo

WHY THIS STRUCTURE

Reduces Part Count & Sources of Assembly Error, Positions the camera station and fixture around one rotary reference.

Cables Do Not Need to Pass around the Outside, Reduces cable-chain interference and simplifies wiring during repeated indexing.

More Compact Structure, But Table Diameter, Load center of gravity and offset moment must be calculated for the actual fixture.

SELECTION CHECKLIST

LoadWeight, Dimensions, Lever Arm, Center of Gravity

MotionTarget Speed, Angle, Travel, Acceleration & Deceleration Time

Cycle TimeTime per Cycle, Start/Stop Frequency, Daily Operating Hours

AccuracyPositioning Accuracy, Repeatability, Allowable Backlash

MotorPower, Model, Shaft Diameter, Shaft Length, Pilot Diameter, Hole Spacing

InstallationSpace, Orientation, Radial/Axial Force, Offset Load