Name: PLF028
Brand: ANDANTEX

PLF028PLF Square-Flange Spur Gearbox

PLF SERIES

PLF028

General Automation, Packaging, Conveying, Dispensing, Screwdriving Applications. This page provides product configuration information, Engineering Resource Links, Motor Interface Checks, Application & Selection Support.

PLF028Frame Size

Square-Flange Spur Planetary GearboxSeries Structure

Submit Selection Requirements View All Sizes in This Series

TECHNICAL DATA

Key Technical Specifications

H Structure L1/L2 Entered from the Original Drawing. L2-X Drawing Specifications and H Differ Significantly, Not Used as Shared Selection Specifications Yet.

AND-PD-PLF028-001 Technical Data SheetOriginal 2D Drawing SpecificationsCheck Structure & Stage Count

Item	Parameters	Description
Example Model	PLF028 L1 H / L2 H	H and X Are Different Structures, Drawings Are Managed Separately
Gear Ratio	L1: 3/4/5/7/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100	H Original Structure Drawing; The Rated Torque Table for Some Ratios Is“/”
Rated Output Torque	3–9 Nm(Only H Ratios Specified in the Drawing)	L1 4=9, 5=8.5, 7=5, 10=3, 3 Not Specified; L2 16/20/28/40=9, 25/35/50=8.5, 70=5, 12/15/30/100 Not Specified
Backlash	H Structure L1 ≤12 arcmin; L2 ≤15 arcmin	X Verify against the Structure-Specific Drawing
Rated Speed	H Structure 3000 rpm	L2-X The Drawing Gives Different Values, Not Currently Used as H Shared Model Values
Maximum Input Speed	H Structure 6000 rpm	By H Structure L1/L2 Original Drawing
Efficiency	H Structure L1 96%; L2 94%	Grouped by Stage Count
Maximum Axial Force	H Structure 80 N	X Check the configuration against the original drawing
Maximum Radial Force	H Structure 150 N	X Check the configuration against the original drawing
Operating Temperature	H Structure L1 -15℃～+90℃; L2 -10℃～+90℃	The lower temperature limits differ between two-stage drawings
IP Rating	H Structure L1 IP65; L2 IP54	L1-X Original Drawing Label IP65; L2-X Original Drawing Label IP65 Specification differences require technical review
Service Life	H Structure 20000 h	L1/L2 H Drawing Annotation
Weight	H Structure L1 0.16 kg; L2 0.25 kg	Only H Value on Original Drawing; X Verify Structure Separately

RATIO OPTIONS

L1 / L2 Gear Ratio

H Structure: L1 3/4/5/7/10; L2 12/15/16/20/25/28/30/35/40/50/70/100. Blank Rated Torque Values Require Separate Confirmation; X Use the corresponding original drawing and technical review for this structure.

MOTOR INTERFACE FINDER

Find by Interface Dimensions PLF028 Drawings

By Motor Input Shaft Diameter, Find matching files using pilot diameter and mounting hole spacing L1 / L2 Engineering Resources.

QUICK MATCH

Filter Quickly Using Motor Dimensions

H Structure by 5-20-28 Find 2D Drawings & Corresponding Files by Interface STEP; X Structure-Specific 2D Drawings Are Listed Separately, Not Received X Structure STEP.

Resource TypeNumber of StagesMotor Shaft DiameterLocating PilotMounting Hole Spacing PCD

4 Searchable Structure & Stage ConfigurationsH Structure 2 2D Drawing Groups and STEP Paired; X Structure 2 Groups with 2D Drawings Only.

X and H Verify Each Structure Separately, Especially L2-X Parameter Differences in the Original Drawing Tables.

REAL ENGINEERING FILES

PLF028 2D / 3D Engineering Resources

4 Original 2D Drawings; Only H Structure L1/L2 Each Has Corresponding STEP, X Structure Has No STEP.

62D + 3D File

4Interface / Stage Combinations

2Complete Resource Set

2Pending Addition or Review

Loading Resources…Original 2D and STEP Download Separately

No Match Found?Submit Motor Drawing →

DOWNLOAD CHECK

Check shaft diameter before downloading, Pilot Diameter & Hole Spacing

X Structure Currently Has No STEP; L2-X Torque in the Original Drawing, Speed, Load Capacity & Weight Compared with H Different, Requires Technical Verification, Do Not Use H Another Structure’s Parameters as a Substitute.

Request Engineering Review

APPLICATIONS

Suitable Applications

View Applications →

General Automation, Packaging, Conveying, Dispensing, Screwdriving ApplicationsView Applications & Recommended Structures →Select by Motor & ApplicationInput Power, Structure, Torque & Interface →

FAQ

Selection FAQ

PLF028 Can I Order by Model Number Alone?

First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.

Drawings and 3D How to Confirm Models?

Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.

What If My Specifications Are Incomplete?

Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.

ENGINEERING RFQ

Need a Quote or Engineering Review?

Submit PLF028 Motor Model for, Gear Ratio, Load & Mounting Conditions, Our engineers will review a single consolidated specification sheet.

Generate PLF028 RFQ

PLF028 Standard Planetary Gearbox