PRECISION DRIVE
PLF160 Standard Planetary Gearbox
View specifications, mounting dimensions and available engineering files for the PLF160 Standard Planetary Gearbox.
Review the technical specifications below, then select the motor interface and engineering files for your configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLF Square-Flange Spur Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 160 | Model Specifications |
| Gear Ratio | L1：3/4/5/7/10；L2：12/15/16/20/25/28/30/35/40/50/70/100 | 12, 15 Ratio in L2 Marked as an Alternative in the Drawing; See the Next Row for Torque by Ratio |
| Rated Output Torque | 210–423 Nm( By Ratio) | L1：3=364、4/5=423、7=358、10=210；L2：12/15/30=364、16/20/25/28/35/40/50=423、70=358、100=210 Nm |
| Maximum Torque | Of the Rated Output Torque 1.5 Times | Calculate from Rated Output Torque at the Corresponding Ratio, Not a Continuous Rating |
| Backlash | L1 ≤8 arcmin；L2 ≤12 arcmin | Standard Backlash Varies by Stage Count |
| Maximum Input Speed | 4000 rpm | 2D Maximum Input Speed Specified in the Drawing |
| Rated Input Speed | 3000 rpm | 2D Rated Input Speed Specified in the Drawing |
| Output Flange / Square Size | 165 mm | Square output flange dimension from https://www.andantexcn.com/wp-content/themes/andantex-local-test/site/assets/downloads/plf160/v1244/2d/plf160-interface-l1-35-114p3-200-2d.jpg. Reference configuration; custom structures may differ. |
| Efficiency | L1 96%；L2 94% | Grouped by Stage Count |
| Operating Temperature | -10℃～+90℃ | Verified L1/L2 Drawings |
| Maximum Axial Force | 1500 N | 2D Drawing Specifies Allowable Axial Force |
| Maximum Radial Force | 2250 N | 2D Allowable Radial Force Specified in the Drawing |
| Weight | L1 15.5 kg；L2 17 kg | Weight Listed in the Verified Drawing, ±3%; Confirm Other Custom Structures against Their Engineering Drawings |
| IP Rating | IP65 | Verified L1/L2 Drawings |
| Service Life | 20000 h | 2D Service Life Specified in the Drawing |
Need a specification that is not listed? Contact us with the required configuration.
Find PLF160 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PLF160 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PLF160 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PLF160.