Skip to content
ANDANTEX / PRECISION TRANSMISSIONSelection Support / 3D Resources / Custom Engineering
Home / Products / Motor-Based Selection

Find a Gearbox for Your Stepper or Servo Motor

Choose your motor type first. For stepper motors, start with NEMA 23 or NEMA 34; for servo motors, add power and the dimensions on your motor drawing. Preview recorded configurations, then confirm the load and final fit.

01

What Type of Motor Do You Have?

03

Application (Optional)

02

Starting frame size for your servo motor

These common power ratings suggest a starting frame size. Check the load and motor interface before selection.

04

Output Structure (Optional)

05

Rated Torque Range (Optional)

06

Recorded Accuracy (Optional)

07

Motor Interface from Your Drawing

Enter the dimensions you know in mm. Typed dimensions must match a recorded configuration. Hole spacing must use the same side or diagonal convention as the drawing; do not interchange them.

⚙

Choose your motor type to begin

Your motor type controls the available sizes, filters and product previews. Only recorded configurations for that motor type are shown.

CONTACT

Location & Contact

Dongguan Hanrui Automation Technology Co., Ltd.

6th Floor, No. 172 Chonghuan Middle Road, Shijie Town, Dongguan, China

Phone: +86 769 8281 3091

Email: oliver@andantexcn.com

INTERFACE CHECK

Four motor dimensions to check

Even at the same 750 W servo rating, shaft and flange dimensions may differ across brands and series. Check these four items before ordering.

① Motor Shaft Diameter

Determines bushing or clamping compatibility.

② Shaft Length / Keyway

Prevents shaft bottoming or insufficient clamping length.

③ Locating Pilot

Locates the motor concentrically with the gearbox input flange.

④ Mounting Hole Spacing

Confirm that mounting bolt holes align.

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.