Skip to content
ANDANTEX / PRECISION TRANSMISSIONSelection Support / 3D Resources / Custom Engineering

Gearbox Technical Knowledge Center

Browse Selection Topics, Parameters, Installation, Maintenance & Company/Product Updates.

Found 30 articles.

Selection Basics

Gearbox Output Shaft Radial Load: A Timing-Belt Pulley Example

A timing pulley on a gearbox output transmits torque, but it also pulls sideways on the output shaft. That radial load acts on the shaft and its bearings. Checking output torque alone can therefore miss an important part of the gearbox selection. This example shows why the force that produces torque is different from the…

Read More
Selection Basics

How to Size an AGV Wheel-Drive Gearbox: A 600 kg Example

To size an AGV wheel-drive gearbox, start with the total moving mass, required vehicle speed, wheel diameter, slope and acceleration. Use those inputs to estimate wheel speed and traction torque, then check each gearbox, motor, wheel and mounting interface against its actual ratings. The worked example below is illustrative, not a measured customer test or…

Read More
Selection Basics

Hollow Shaft vs Solid Shaft Right-Angle Gearboxes: Which Output Fits Your Machine?

When choosing a right-angle gearbox, the output connection determines how the gearbox fits the machine and how the load reaches its bearings. A hollow output receives a mating machine shaft; a solid output provides a projecting shaft for a coupling, pulley or other connection. The correct choice depends on the complete installation, not on which…

Read More
Selection Basics

KRV Hypoid vs NMRV Worm Gearboxes: Efficiency, Heavy Loads and Holding Torque

KRV hypoid and NMRV worm gearboxes both provide right-angle speed reduction, but their transmission characteristics suit different machines. KRV is often considered where efficiency and continuous running matter; NMRV offers large single-stage ratios for low-speed, high-torque applications and can provide resistance to back-driving in certain configurations. KRV063 / KRV38 hypoid gearboxNMRV050 worm gearbox Key differences…

Read More
Understanding Specifications

Planetary Gearbox Torque Calculator: Ratio, Efficiency and Speed

Estimate gearbox output torque and speed from motor torque, reduction ratio and efficiency. Includes formulas, a worked example and model-rating checks.

Read More
Understanding Specifications

Stepper Motor Speed and Pulse Frequency: Formulas and Examples

Calculate stepper motor RPM from pulse frequency, step angle and microstep setting. Work through a 1.8-degree example and check gearbox output speed.

Read More
Selection Basics

How to Evaluate Planetary Gearbox Manufacturers

Compare planetary gearbox manufacturers using drawings, duty-cycle ratings, motor compatibility, sample acceptance and supply terms instead of frame size alone.

Read More
Selection Basics

Right-Angle Bevel Gearboxes: Shaft Layout and Selection

Understand bevel gearbox layouts, hollow-bore and shaft outputs, rotation direction and load checks. Compare right-angle options for servo-driven machinery.

Read More
Selection Basics

High-Speed Planetary Gearboxes: Input Speed and Thermal Duty

Select a high-speed planetary gearbox by input speed, ratio, continuous duty, peak torque and thermal limits. Includes a worked speed calculation.

Read More
Selection Basics

Helical vs Spur Planetary Gearboxes: How to Choose

Compare helical and spur planetary gearboxes for servo axes. Check noise, backlash, stiffness, bearing loads and the exact duty cycle before selection.

Read More
Selection Basics

Custom Planetary Gearbox: An OEM Specification Checklist

Specify a custom planetary gearbox with a clear motor interface, output connection, load cycle and approval drawing. See what to include in an OEM enquiry.

Read More
Selection Basics

What Does "Bore Input" Mean on a Servo Gearbox?

Understand coupling-bore, splined-bore, keyed-bore and shaft inputs, with servo motor matching checks and ANDANTEX right-angle gearbox examples.

Read More

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.