PRECISION DRIVE
PAG040 Precision Planetary Gearbox
Review the ANDANTEX PAG040 Precision Planetary Gearbox: product specifications, available engineering resources and selection information for your application.
PAG040 Precision Planetary Gearbox
Review the ANDANTEX PAG040 Precision Planetary Gearbox: product specifications, available engineering resources and selection information for your application.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PAG Square-Flange Helical Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 040 | Model Specifications |
| Gear Ratio | L1：3/4/5/7/8/10；L2：12/15/20/25/28/30/35/40/50/70/100 | 8, 12, 15, 30 Rated Torque Is Marked in the Drawing as "/"; Do Not Use This Value for Torque Selection |
| Rated Output Torque | 10–17 Nm( Only Values Listed in the Drawing) | L1: 3/4=17, 5=15, 7=12, 10=10; L2: 20/28/40=17, 25/35/50=15, 70=12, 100=10 Nm; Other Values Are Not Specified |
| Maximum Torque | Of the Rated Output Torque 1.5 Times | Applies Only to Ratios with a Specified Rated Torque |
| Backlash | L1 ≤3 arcmin；L2 ≤5 arcmin | Select Drawing by Stage Count |
| Maximum Input Speed | 8000 rpm | Maximum Input Speed Specified in the Drawing |
| Rated Input Speed | 4000 rpm | Rated Input Speed Specified in the Drawing |
| Efficiency | L1 95%；L2 90% | Two-Stage Efficiency Differs |
| Operating Temperature | -10℃～+90℃ | Verified L1/L2 Interface Drawings |
| Maximum Axial Force | 390 N | 2D Maximum Axial Force Specified in the Drawing |
| Maximum Radial Force | 780 N | 2D Maximum Radial Force Specified in the Drawing |
| Weight | L1 0.5 kg；L2 0.8 kg | As Shown 8-30-45 Motor Interface, ±3%; Confirm Other Interfaces against Their Engineering Drawings |
| IP Rating | L1 IP65；L2 IP56 | Based on Two Original 2D Entered Separately from Each Drawing, Do Not Apply IP65 To L2 |
| Service Life | 20000 h | Service Life Specified in the Drawing |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Specifications / Gear Ratio
L1：3/4/5/7/8/10；L2：12/15/20/25/28/30/35/40/50/70/100
8, 12, 15, 30 Rated Torque Is Marked in the Drawing as "/"; Do Not Use This Value for Torque Selection
Gear Ratio, Confirm Stages & Interface Using the Required Configuration and Official Drawing.
Find by Interface Dimensions PAG040 Drawings
The Same Model Can Store Separate Servo, Stepper, Custom and Different L1/L2 Configurations; Options Expand Automatically as Engineering Resources Are Published.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Select the Motor Type in Order, Stages, Shaft Diameter, Pilot Diameter & Hole Spacing; Results Are Listed by Interface 2D Drawings and 3D STEP, Missing Files Are Marked as Pending.
PAG040 2D / 3D Engineering Resources
Each Standard Size, Motor Interface & Custom Combination Is Managed Separately 2D Drawing and 3D STEP; 2D Supports Images and PDF.
Check the Model before Downloading, Size & Interface
Use the Current Order Model & Official Engineering Drawing; Custom Input, Outputs & Flanges Require Their Own Resources.
Selection FAQ
PAG040 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need a Quote or Engineering Review?
Submit PAG040 Gear Ratio for, Load & Installation Requirements.