Skip to content
ANDANTEX / PRECISION TRANSMISSIONSelection Support / 3D Resources / Custom Engineering
Home / Applications / Packaging Cross-Sealing
PACKAGING

Packaging Cross-Sealing

SE075-750W + PLF090-5, For continuous high-speed reciprocation, focus on thermal load, Peak Torque & Sealing/Cutting Synchronization.

Motor 750W Servo
Recommended Model PLF090-5
Key Parameters Peak Torque / Temperature Rise
Operating Conditions Continuous High Speed / Cyclic Acceleration & Deceleration
WORKING CONDITIONS

What Matters Most When Selecting for This Application?

  • Cross-sealing axes often operate continuously at high speed, With cyclic acceleration and deceleration, Peak torque may be significantly higher than average torque.
  • The sealing and cutting mechanism must synchronize with film feed speed, Mechanical backlash and control settings both affect seal position.
  • During prolonged high-speed operation, monitor gearbox temperature and lubrication.

Recommended Combination

PLF090-5

750W Servo

View Product Resources
CONTACT

Location & Contact

Dongguan Hanrui Automation Technology Co., Ltd.

6th Floor, No. 172 Chonghuan Middle Road, Shijie Town, Dongguan, China

Phone: +86 769 8281 3091

Email: oliver@andantexcn.com

WHY THIS STRUCTURE

Why This Transmission Structure Is Recommended?

PLF090 Suitable for 750W Common Servo Automation Applications

The square-flange structure integrates easily into cross-sealing axes, A candidate for standardized general-purpose packaging platforms.

5:1 This example balances speed and output torque

It can maintain a relatively high cycle speed, While increasing output torque; Final checks must consider sealing/cutting peaks and thermal load.

General-Purpose Structure, Multiple Interface Combinations, Suitable for Packaging Machinery Production

The same mechanical platform can accommodate different motor interfaces, Reduce drawing revisions and spare-part varieties.

SELECTION CHECKLIST

Information to Include in Your Selection Request

LoadWeight, Dimensions, Lever Arm, Center of Gravity
MotionTarget Speed, Angle, Travel, Acceleration & Deceleration Time
Cycle TimeTime per Cycle, Start/Stop Frequency, Daily Operating Hours
AccuracyPositioning Accuracy, Repeatability, Allowable Backlash
MotorPower, Model, Shaft Diameter, Shaft Length, Pilot Diameter, Hole Spacing
InstallationSpace, Orientation, Radial/Axial Force, Offset Load

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.