PRECISION DRIVE
PAMG090 Right-Angle Helical Planetary Gearbox | for Automation Drives
PAMG090 is a right-angle helical planetary gearbox for automation drives, with a square flange and 22 mm shaft output. The supplied L1 and L2 drawings specify ratio-dependent rated torque from 75 to 130 N·m. Choose the exact motor interface to check backlash, efficiency, temperature limits and mounting dimensions. Interface-specific 2D drawings and STEP models are available below.
PAMG090 Right-Angle Helical Planetary Gearbox | for Automation Drives
PAMG090 is a right-angle helical planetary gearbox for automation drives, with a square flange and 22 mm shaft output. The supplied L1 and L2 drawings specify ratio-dependent rated torque from 75 to 130 N·m. Choose the exact motor interface to check backlash, efficiency, temperature limits and mounting dimensions. Interface-specific 2D drawings and STEP models are available below.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PAMG Right-Angle Helical Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 090 | Model Specifications |
| Output Structure / Flange Type | Right-angle input; square flange; 22 mm shaft output | Refer to the selected interface drawing. |
| Gear Ratio | L1: 3, 4, 5, 7, 8, 10, 14, 20; L2: 25, 30, 35, 40, 50, 70, 100 | Availability depends on the selected interface. |
| Rated Torque | 75-130 N·m | Ratio-dependent. At L2 ratio 100: 130 N·m for 19-70-90; 75 N·m for 16-80-100 and 19-80-100. |
| Maximum Torque | 1.5 x rated torque | As specified in the supplied drawings. |
| Backlash | L1 <=5 arcmin; L2 <=7 to <=10 arcmin | 19-70-90: L1 <=5, L2 <=7; L2 19-80-100 <=8; L2 16-80-100 <=10. |
| Maximum Input Speed | 6000 rpm | — |
| Rated Speed | 3000 rpm | Rated input speed. |
| Efficiency | L1: 95%; L2: 90-92% | 19-70-90 L2: 92%; other supplied L2 interfaces: 90%. |
| Operating Temperature | Interface-dependent | 19-70-90: -10 to +90 C; L2 19-80-100: -20 to +90 C; L2 16-80-100: -20 to +80 C. |
| Maximum Axial Force | 1500 N | — |
| Maximum Radial Force | 3300 N | — |
| Weight | L1: 6.45 kg; L2: 8.8 kg | Tolerance +/-3%. |
| Typical Interface | 19-70-90; 16-80-100; 19-80-100 | Input shaft diameter - pilot diameter - mounting PCD, in mm. |
| IP Rating | IP65 | — |
| Service Life | 20000 h | Drawing specification; actual life depends on duty and operating conditions. |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Specifications / Gear Ratio
L1: 3, 4, 5, 7, 8, 10, 14, 20; L2: 25, 30, 35, 40, 50, 70, 100
Availability depends on the selected interface.
Gear Ratio, Confirm Stages & Interface Using the Required Configuration and Official Drawing.
Find by Interface Dimensions PAMG090 Drawings
The Same Model Can Store Separate Servo, Stepper, Custom and Different L1/L2 Configurations; Options Expand Automatically as Engineering Resources Are Published.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Select the Motor Type in Order, Stages, Shaft Diameter, Pilot Diameter & Hole Spacing; Results Are Listed by Interface 2D Drawings and 3D STEP, Missing Files Are Marked as Pending.
PAMG090 2D / 3D Engineering Resources
Each Standard Size, Motor Interface & Custom Combination Is Managed Separately 2D Drawing and 3D STEP; 2D Supports Images and PDF.
Check the Model before Downloading, Size & Interface
Use the Current Order Model & Official Engineering Drawing; Custom Input, Outputs & Flanges Require Their Own Resources.
Selection FAQ
PAMG090 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need a Quote or Engineering Review?
Submit PAMG090 Gear Ratio for, Load & Installation Requirements.