PRECISION DRIVE
PVEA120 Right Angle Planetary Gearbox
Review the ANDANTEX PVEA120 Right Angle Planetary Gearbox: product specifications, available engineering resources and selection information for your application.
PVEA120 Right Angle Planetary Gearbox
Review the ANDANTEX PVEA120 Right Angle Planetary Gearbox: product specifications, available engineering resources and selection information for your application.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PVEA Right-Angle Round-Flange Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 120 | Model Specifications |
| Gear Ratio | L1：3/4/5/7/10；L2：12/15/20/25/30/35/40/50/70/80/90/100 | Backfilled from the Model Page's Ratio Section; Torque Must Still Be Checked against the Official 2D Specification Table |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Specifications / Gear Ratio
L1：3/4/5/7/10；L2：12/15/20/25/30/35/40/50/70/80/90/100
Backfilled from the Model Page's Ratio Section; Torque Must Still Be Checked against the Official 2D Specification Table
Gear Ratio, Confirm Stages & Interface Using the Required Configuration and Official Drawing.
Find by Interface Dimensions PVEA120 Drawings
The Same Model Can Store Separate Servo, Stepper, Custom and Different L1/L2 Configurations; Options Expand Automatically as Engineering Resources Are Published.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Select the Motor Type in Order, Stages, Shaft Diameter, Pilot Diameter & Hole Spacing; Results Are Listed by Interface 2D Drawings and 3D STEP, Missing Files Are Marked as Pending.
PVEA120 2D / 3D Engineering Resources
Each Standard Size, Motor Interface & Custom Combination Is Managed Separately 2D Drawing and 3D STEP; 2D Supports Images and PDF.
Check the Model before Downloading, Size & Interface
Use the Current Order Model & Official Engineering Drawing; Custom Input, Outputs & Flanges Require Their Own Resources.
Supplied Drawing Revision - Engineering Review Required
The supplier confirmed that the primary drawing correctly identifies PVEA120; its PVFA120 filename prefix is a naming error. A separate alternate drawing has the same 24-110-145 interface but a conflicting ratio table. The alternate file below lists ratios 3-10 despite its L2 filename. Confirm the correct revision before manufacture or assembly.
Download Alternate Supplied Drawing - Review Required (JPG)
Selection FAQ
PVEA120 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need a Quote or Engineering Review?
Submit PVEA120 Gear Ratio for, Load & Installation Requirements.