PRECISION DRIVE
PBE120 Hollow Output Planetary Gearbox
PBE120 has a 20 mm keyed output bore. The supplied drawings cover L1/L2 22-110-145 interfaces and an L1 24-95-115M6 variant.
PBE120 is an inline planetary gearbox with a keyed hollow output. Standard drawings show a 22-110-145 motor interface; a separate L1 version uses a 24-95-115 interface. Rated L1 output torque ranges from 86 to 211 N·m, depending on ratio. The alternative interface has separate dimensions and accuracy requirements, so use its own drawing for selection.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PBE Round-Flange Hollow-Output Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 120 | Model Specifications |
| Output Structure / Flange Type | Inline planetary gearbox; 20 mm keyed output bore | — |
| Gear Ratio | L1: 3/4/5/7/10; L2: see selected drawing | Ratio availability and rated torque must be confirmed for the selected configuration. |
| Rated Output Torque | L1 86–211 N·m; L2 86–210 N·m; ratio dependent | — |
| Maximum Torque | 1.5 × rated torque | — |
| Backlash | Reference 22-110-145: L1 ≤8 arcmin; L2 ≤12 arcmin | Applies to 22-110-145 reference drawings only. Alternative 24-95-115M6 source shows ≤8–16 arcmin; confirm actual grade. |
| Maximum Input Speed | 6000 rpm | — |
| Rated Speed | 3500 rpm (input) | — |
| Efficiency | L1 96%; L2 94% | — |
| Operating Temperature | −10 to +90 °C | — |
| Maximum Axial Force | 1000 N | — |
| Maximum Radial Force | 1240 N | — |
| Weight | L1 6.93 kg; L2 8.98 kg (±3%) | — |
| Typical Interface | 22 / 110 / 145 mm; alternative L1 24 / 95 / 115 mm | — |
| IP Rating | IP65 | — |
| Service Life | 20000 h (drawing reference) | — |
Need a specification that is not listed? Contact us with the required configuration.
Find PBE120 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PBE120 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PBE120 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PBE120.