PRECISION DRIVE
PLX060 Flange-Output Planetary Gearbox | for Rack-and-Pinion Drives
The ANDANTEX PLX060 is a disc-flange-output planetary gearbox for rack-and-pinion drive applications. Select an L1 or L2 configuration and match the motor shaft diameter, locating register and mounting PCD using the corresponding dimensional drawing. Published rated output torque is 35-50 Nm, depending on ratio and configuration. Interface-specific loads and dimensions must be checked against the selected drawing.
The ANDANTEX PLX060 is a disc-flange-output planetary gearbox for rack-and-pinion drive applications. Select an L1 or L2 configuration and match the motor shaft diameter, locating register and mounting PCD using the corresponding dimensional drawing. Published rated output torque is 35-50 Nm, depending on ratio and configuration. Interface-specific loads and dimensions must be checked against the selected drawing.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLX Disc-Flange Output Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 060 | Model Specifications |
| Output Structure / Flange Type | Disc-flange output; rotating flange diameter 40 mm | Output fastening PCD 31.5 mm, 7 x M5 depth 8 mm and one 5 mm locating hole. Housing register 64 mm; mounting PCD 79 mm with 8 x 4.5 mm through holes. |
| Confirmed Typical Applications | Rack-and-pinion drives | — |
| Example Model | PLX060-35-S2-P0 | — |
| Gear Ratio | L1: 4, 5, 7, 10; L2: 16, 20, 25, 28, 35, 40, 50, 70, 100 | Only ratios with documented rated torque are listed; confirm the selected interface. |
| Rated Output Torque | 35-50 Nm | L1: 4/5/7 = 40 Nm; 10 = 35 Nm. L2: 16/20/25/28/35/40/50/70 = 50 Nm; 100 = 35 Nm. Ratio 16 is documented for the 14-50-70 interface only. |
| Maximum Torque | 1.5 x rated torque | — |
| Backlash | L1: <=3 arcmin; L2: <=5 arcmin | As stated in the corresponding stage drawing. |
| Maximum Input Speed | 6000 rpm | Maximum input speed; confirm duty cycle. |
| Rated Speed | 4000 rpm | Rated input speed. |
| Efficiency | L1: 95%; L2: 90% | — |
| Operating Temperature | -10 to +90 C | — |
| Maximum Axial Force | 513 N; M5 variant: 340 N | M5 variant: 340 N; other supplied PLX060 drawings: 513 N. |
| Maximum Radial Force | 2050 N; M5 variant: 680 N | Use the exact interface drawing; M5 and standard variants are not interchangeable. |
| Weight | L1: 1.3 kg; L2: 1.9 kg | Drawing values, tolerance +/-3%. |
| Typical Interface | 8-38.1-66.7; 11-50-70; 14-50-70; 14-50-70-M5 | Notation: input shaft diameter - motor locating register - motor mounting PCD, in mm. |
| IP Rating | IP65 | — |
| Service Life | 20000 h | Drawing-stated service life; actual life depends on operating conditions. |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Specifications / Gear Ratio
L1: 4, 5, 7, 10; L2: 16, 20, 25, 28, 35, 40, 50, 70, 100
Only ratios with documented rated torque are listed; confirm the selected interface.
Gear Ratio, Confirm Stages & Interface Using the Required Configuration and Official Drawing.
Find by Interface Dimensions PLX060 Drawings
Choose the motor interface and reduction stage that match your configuration. Each drawing and STEP file applies to its stated variant.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Filter by motor type, reduction stage and the dimensions on your motor drawing. Matching configurations show their available drawings and STEP files; missing files are marked.
PLX060 2D / 3D Engineering Resources
Choose the files for the exact model, motor interface and reduction stage. Dimensional drawings may be images or PDF; 3D models are STEP files.
Check the Model before Downloading, Size & Interface
Check the complete model and configuration against the approved engineering drawing. Custom inputs, outputs and flanges require their own matching files.
Selection FAQ
PLX060 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need a Quote or Engineering Review?
Submit PLX060 Gear Ratio for, Load & Installation Requirements.