PRECISION DRIVE
PLE160 Round-Flange Planetary Gearbox | for Automation
The ANDANTEX PLE160 is a round-flange spur planetary gearbox for automation drives.
Choose single-stage L1 or two-stage L2 configurations and select the motor interface that matches your installation. Check ratio-specific torque and dimensional drawings before ordering.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLE Round-Flange Spur Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 160 | Model Specifications |
| Gear Ratio | L1: 3/4/5/7/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100 | Ratios 12 and 15 are marked as secondary choices in the drawings. Confirm availability for the selected motor interface. |
| Rated Output Torque | L1/L2: 210-423 Nm | L1 ratios 3/4/5/7/10 = 364/423/423/358/210 Nm. L2: 12/15/30 = 364; 16/20/25/28/35/40/50 = 423; 70 = 358; 100 = 210 Nm. |
| Maximum Torque | 1.5 × rated output torque | Confirm allowable peak duration and duty cycle. |
| Backlash | L1: ≤8 arcmin; L2: ≤12 arcmin | — |
| Maximum Input Speed | 4000 rpm | — |
| Rated Speed | 3000 rpm (input) | Rated input speed, not output speed. |
| Efficiency | L1: 96%; L2: 94% | — |
| Operating Temperature | -10 to +90 °C | — |
| Maximum Axial Force | 1500 N | — |
| Maximum Radial Force | 2250 N | — |
| Weight | L1: 15.5 kg; L2: 17.0 kg | Drawing reference values, tolerance ±3%; confirm the selected configuration. |
| IP Rating | IP65 | — |
| Service Life | 20,000 h (drawing reference) | Drawing-listed reference; actual life depends on speed, loads, duty cycle and installation. |
Need a specification that is not listed? Contact us with the required configuration.
Find PLE160 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PLE160 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PLE160 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PLE160.