PRECISION DRIVE
PLF040 Standard Planetary Gearbox
View specifications, mounting dimensions and available engineering files for the PLF040 Standard Planetary Gearbox.
Review the technical specifications below, then select the motor interface and engineering files for your configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLF Square-Flange Spur Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 40 | Model Specifications |
| Example Model | PLF040-5-S2-P2 | Example; Confirm the Model by Interface, Verify Ratio & Motor |
| Gear Ratio | L1：3/4/5/7/10；L2：12/15/16/20/25/28/30/35/40/50/70/100 | L2 of 12, 15 As an Alternative; Original Rated Torque Values for Some Ratios Are "/", Requires Separate Confirmation |
| Rated Output Torque | 10–16 Nm( Standard Interface Ratios Specified on the Drawing) | L1: 4=16, 5=15, 7=12, 10=10, Standard Drawing 3 Not Specified; Custom Output Drawing 3=16. L2: 16/25/28/40=16, 20/50=15, 35/70=12, 100=10; 12/15/30 Not Specified |
| Backlash | Standard Interface L1 ≤8 arcmin; L2 ≤12 arcmin | L1 Input Shaft Length 32 Drawing Label ≤16 arcmin, Do Not Apply Standard L1 Values |
| Maximum Input Speed | 8000 rpm | Verified L1/L2 Drawing Annotation |
| Rated Input Speed | Standard Interface 4500 rpm; Some L1 Custom 4000 rpm | Corresponds to Standard Interfaces & Custom Outputs / Input Shaft Length 32 Original Drawing |
| Output Flange / Square Size | 42 mm | Square output flange dimension from https://www.andantexcn.com/wp-content/themes/andantex-local-test/site/assets/downloads/plf040/v1245/2d/plf040-interface-l1-5-22-43p8-2d.jpg. Reference configuration; custom structures may differ. |
| Efficiency | L1 96%；L2 94% | Grouped by Stage Count |
| Operating Temperature | Standard Interface -10℃～+90℃ | Some L1 Custom Output Drawing Is Marked -20℃～+80℃; Use the Corresponding Engineering Drawing |
| Maximum Axial Force | 150 N | Maximum Axial Force on Original 2D Drawing |
| Maximum Radial Force | 185 N | Maximum Radial Force on Original 2D Drawing |
| Weight | Standard Interface L1 0.43 kg; L2 0.65 kg | Example Weight Provided in the Drawing, ±3%; Use the Corresponding Drawing for Custom Structures |
| IP Rating | L1 Some Interfaces IP54 / IP65; L2 Standard Interface IP65 | L1 8-30-46, Custom Output & Shaft Length 32 Drawing Label IP54; L1 5-22-43.8 and 8-30-45 Drawing Label IP65; Check by Interface |
| Service Life | 20000 h | Service Life on Original 2D Drawing |
Need a specification that is not listed? Contact us with the required configuration.
Find PLF040 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PLF040 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PLF040 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PLF040.