PRECISION DRIVE
PVEA090 Right Angle Planetary Gearbox
View specifications, mounting dimensions and available engineering files for the PVEA090 Right Angle Planetary Gearbox.
Review the technical specifications below, then select the motor interface and engineering files for your configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PVEA Right-Angle Round-Flange Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 090 | Model Specifications |
| Output Structure / Flange Type | Right-angle transmission; round output flange with keyed shaft | Match output dimensions to the selected configuration. |
| Gear Ratio | L1: 3/4/5/7/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100 | L2 ratios 12 and 15 are secondary options; confirm availability for the selected motor interface. |
| Rated Output Torque | L1: 56–122 Nm; L2: 56–122 Nm | Ratio: torque (Nm). L1 — 3:96; 4/5:122; 7:95; 10:56. L2 — 12/15/30:96; 16/20/25/28/35/40/50:122; 70:95; 100:56. |
| Maximum Torque | 1.5 × rated output torque | Maximum torque; confirm allowable duration and duty cycle. |
| Backlash | L1: ≤16 arcmin; L2: ≤20 arcmin | Standard backlash for the listed configurations. |
| Maximum Input Speed | 6000 rpm | Confirm duty cycle at maximum input speed. |
| Rated Speed | 3500 rpm (input) | Rated input speed. |
| Efficiency | L1: 95%; L2: 92% | Efficiency depends on the number of stages. |
| Operating Temperature | -10 to +90 °C | Operating temperature range. |
| Maximum Axial Force | 430 N | Confirm combined loads and load position. |
| Maximum Radial Force | 450 N | Confirm combined loads and load position. |
| Weight | L1: 4.4 kg; L2: 5.0 kg | Tolerance ±3%; motor interface and custom output may change weight. |
| IP Rating | IP65 | Protection rating for the listed configurations. |
| Service Life | 20,000 h | Actual life depends on load, speed, duty cycle and operating conditions. |
Need a specification that is not listed? Contact us with the required configuration.
Find PVEA090 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PVEA090 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PVEA090 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PVEA090.