PRECISION DRIVE
PVFA060 Right Angle Planetary Gearbox
PVFA060 right-angle square-flange planetary gearbox with L1 and L2 reduction stages. Select from five documented motor-interface configurations and download the matching 2D drawing and STEP model.
Drawing revision 22A/01 covers three L1 configurations and two L2 configurations. L1 ratios: 3, 4, 5, 7, 10. L2 ratios: 12, 15, 16, 20, 25, 28, 30, 35, 40, 50, 70, 100. Rated input speed is 4,000 rpm; maximum input speed is 8,000 rpm. Output shaft diameter is 14 mm except for PVFA060-L2-8-38.1-66.7, which uses an 8 mm output shaft. Use the selected configuration drawing to confirm interface dimensions, backlash and rated torque. Product photo is a representative PVFA series image.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PVFA Right-Angle Square-Flange Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 060 | Model Specifications |
| Output Structure / Flange Type | Right-angle, square-flange, solid-shaft output | Output shaft Ø14 mm, except L2-8-38.1-66.7: Ø8 mm. |
| Gear Ratio | L1: 3 / 4 / 5 / 7 / 10; L2: 12 / 15 / 16 / 20 / 25 / 28 / 30 / 35 / 40 / 50 / 70 / 100 | Drawing revision 22A/01. L2 ratios 12 and 15 are secondary recommendations. |
| Rated Output Torque | 16–40 N·m, depending on ratio | L1: i=3: 27; i=4/5: 40; i=7: 34; i=10: 16 N·m. L2: i=12/15/30: 27; i=16/20/25/28/35/40/50: 40; i=70: 34; i=100: 16 N·m. |
| Maximum Torque | 1.5 × rated output torque | — |
| Backlash | L1: ≤8 or ≤16 arcmin; L2: ≤12 or ≤20 arcmin, depending on interface | L1-14-50-70: ≤8; L1 with Ø8 input: ≤16; L2-14-50-70: ≤12; L2-8-38.1-66.7: ≤20 arcmin. |
| Maximum Input Speed | 8,000 rpm | — |
| Rated Speed | 4,000 rpm (input) | — |
| Motor Flange | Input shaft / pilot / PCD: 14 / 50 / 70; 8 / 36 / 70.7; 8 / 38.1 / 66.7 mm | 4×M4, 10 mm deep; L2-8-38.1-66.7: 8 mm deep. Filename 70.71 is retained; drawing PCD is 70.7 mm. |
| Output Flange / Square Size | Output pilot Ø50 mm; PCD 70 mm | — |
| Efficiency | L1: 95%; L2: 92% | — |
| Operating Temperature | −10 to +90 °C | — |
| Maximum Axial Force | 220 N | — |
| Maximum Radial Force | 240 N | — |
| Weight | L1: 1.7 kg; L2: 1.9 kg (±3%) | — |
| Typical Interface | L1: 14-50-70, 8-36-70.7, 8-38.1-66.7; L2: 14-50-70, 8-38.1-66.7 | — |
| IP Rating | IP65 | — |
| Service Life | 20,000 h | — |
Need a specification that is not listed? Contact us with the required configuration.
Find PVFA060 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PVFA060 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PVFA060 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PVFA060.