PRECISION DRIVE
PVFA120 Right-Angle Square-Flange Planetary Gearbox | for Automation
The ANDANTEX PVFA120 combines a right-angle drive with a square output flange and keyed shaft for automation equipment.
Choose L1 or L2 gearing and a 22-110-145, 24-110-145 or 24-95-115 motor interface. Review the selected drawing for ratio availability, dimensions and torque before ordering.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PVFA Right-Angle Square-Flange Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 120 | Model Specifications |
| Output Structure / Flange Type | Right-angle drive with square output flange and keyed shaft | — |
| Gear Ratio | L1: 3/4/5/7/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100 | Ratios vary by interface. L2 22-110-145 and 24-110-145 drawings list 12/15/16/20/25/28/30/35/40/50/70/100. L2 24-95-115 lists 15/20/25/28/30/35/40/50/70/100. Ratios 12 and 15, where listed, are secondary choices. |
| Rated Output Torque | L1/L2: 86-210 Nm | L1 ratios 3/4/5/7/10 = 161/210/210/170/86 Nm. L2: listed 12/15/30 = 161; listed 16/20/25/28/35/40/50 = 210; 70 = 170; 100 = 86 Nm. Follow the selected interface drawing. |
| Maximum Torque | 1.5 × rated output torque | Confirm allowable peak duration and duty cycle. |
| Backlash | L1: ≤16 arcmin; L2: ≤20 arcmin | — |
| Maximum Input Speed | 6000 rpm | — |
| Rated Speed | 3500 rpm (input) | — |
| Efficiency | L1: 95%; L2: 92% | — |
| Operating Temperature | -10 to +90 °C | — |
| Maximum Axial Force | 1000 N | — |
| Maximum Radial Force | 1240 N | — |
| Weight | L1: 12.0 kg; L2: 14.0 kg | Drawing reference values, tolerance ±3%; confirm the selected configuration. |
| Typical Interface | 22-110-145; 24-110-145; 24-95-115 | — |
| IP Rating | IP65 | — |
| Service Life | 20,000 h (drawing reference) | Drawing reference; actual life depends on loads, speed, duty cycle and installation. |
Need a specification that is not listed? Contact us with the required configuration.
Find PVFA120 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PVFA120 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PVFA120 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PVFA120.