PRECISION DRIVE
NT085 Hollow Rotary Table
ANDANTEX NT085 combines a hollow rotary output with a flange for mounting fixtures or inspection tooling.
Routing cables and pneumatic lines through the center helps organize connections around a rotating station. For vision inspection and assembly projects, match the motor interface, required positioning accuracy and load conditions to the selected configuration before ordering.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | NT Standard Hollow Rotary Table | Hollow Rotary Table |
| Specifications / Frame Size | 85 | Model Specifications |
| Example Model | NT085-5 | 85 Hollow Rotary Table |
| Gear Ratio | 5 | Also Available 10 / 20 |
| Rated Torque | 10 Nm | Official Website Data |
| Maximum Torque | 20 Nm | Official Website Data |
| Maximum Axial Force | 500 N | Official Website Data |
| Bearing Type | Crossed Roller Bearing | Official Website Data |
| Positioning Accuracy | ±0.5 arcmin | Official Website Data |
| Positioning Repeatability | ≤10 arcsec | Official Website Data |
Need a specification that is not listed? Contact us with the required configuration.
Find NT085 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
NT085 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Typical applications for NT085
Selection FAQ
Select NT085 What Is Commonly Overlooked When Selecting a Hollow Rotary Table?
Input interfaces and dynamic operating conditions are easily overlooked. In addition to gear ratio and rated torque, Check motor shaft dimensions as well, Pilot Diameter, Hole Spacing, Acceleration & Deceleration Time, Inertia & Offset Loads.
Can the Interface Be Customized for Other Motor Brands?
Confirm the shaft diameter against the motor drawing, Shaft Length, Pilot Diameter, Key dimensions including mounting hole spacing, Then determine the input flange and bushing configuration.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for NT085.