PRECISION DRIVE
PAMG040 Right-Angle Helical Planetary Gearbox | for Automation Drives
The ANDANTEX PAMG040 is a compact right-angle helical planetary gearbox with a square output flange and shaft output.
Supplied drawings cover 5-22-43.8, 8-30-45 and 8-30-46 motor interfaces, with separate custom output-shaft options. Select the exact interface, ratio and accuracy grade before comparing torque, backlash and load capacity. Use the matching 2D drawing and STEP file to check installation dimensions.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PAMG Right-Angle Helical Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 040 | Model Specifications |
| Output Structure / Flange Type | Right-angle input; square flange; shaft output | Standard output shaft diameter 13 mm; separate 8 mm and 10 mm output variants. |
| Gear Ratio | L1: 4, 5, 7, 10; L2: 16, 20, 25, 28, 35, 40, 50, 70, 100 | Available ratios depend on interface and accuracy grade. A slash in a drawing is not a rated value. |
| Rated Output Torque | 9-19 Nm | Depends on ratio, accuracy grade and output-shaft variant; use the selected 2D drawing. |
| Maximum Torque | 1.5 x rated output torque | Apply to the rated torque of the selected configuration. |
| Backlash | Standard P0: L1 <=3 arcmin; L2 <=5 arcmin | 5-22-43.8 P2: L1 <=8 / L2 <=12 arcmin; custom output 8 mm <=12 and output 10 mm <=15 arcmin. |
| Maximum Input Speed | 8000 rpm | Drawing limit; verify duty cycle and application. |
| Rated Speed | 4000 rpm | Rated input speed. |
| Efficiency | Standard: L1 95%; L2 92% | Custom output 8 mm: 97%; output 10 mm: 94%. |
| Operating Temperature | Standard: -10 to +90 C | 5-22-43.8 P2 drawings specify -10 to +80 C. |
| Maximum Axial Force | Standard: 390 N | Custom output 8 mm: 150 N; output 10 mm not specified. |
| Maximum Radial Force | Standard: 780 N | Custom output 8 mm: 185 N; output 10 mm not specified. |
| Weight | Standard: L1 0.7 kg; L2 0.9 kg | Drawing tolerance +/-3%; custom output weights not specified. |
| Typical Interface | 5-22-43.8; 8-30-45; 8-30-46 mm | Input shaft diameter - pilot diameter - mounting PCD. |
| IP Rating | IP65 | As specified in the supplied drawings. |
| Service Life | 20000 h | Drawing specification; actual life depends on loading and duty cycle. |
Need a specification that is not listed? Contact us with the required configuration.
Find PAMG040 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PAMG040 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PAMG040 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PAMG040.