PRECISION DRIVE
PAMG060 Right-Angle Helical Planetary Gearbox | for Automation Drives
The ANDANTEX PAMG060 right-angle helical planetary gearbox combines a square output flange with a 16 mm shaft output.
Supplied L1 and L2 drawings cover rated output torques from 30 to 45 Nm, depending on ratio. Motor interfaces include 11-50-70, 14-50-70 and 8-38.1-66.7 mm. Backlash varies by interface and stage; use the exact drawing when matching a motor and checking installation dimensions.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PAMG Right-Angle Helical Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 060 | Model Specifications |
| Output Structure / Flange Type | Right-angle input; square flange; 16 mm shaft output | Dimensions depend on the selected motor adapter. |
| Gear Ratio | L1: 3, 4, 5, 7, 8, 10, 14, 20; L2: 25, 30, 35, 40, 50, 70, 100 | Ratios listed with torque values in the supplied drawings. |
| Rated Output Torque | 30-45 Nm | L1: 3=40 Nm; 4/5/7/8/10/14=45 Nm; 20=30 Nm. L2: 30=40 Nm; 25/35/40/50/70/100=45 Nm. |
| Maximum Torque | 1.5 x rated output torque | Use the rated torque for the selected ratio. |
| Backlash | L1: <=5 or <=8 arcmin; L2: <=7 arcmin | L1 14-50-70: <=5; L1 11-50-70 and 8-38.1-66.7: <=8 arcmin. |
| Maximum Input Speed | 8000 rpm | Maximum input speed from supplied drawings. |
| Rated Speed | 4000 rpm | Rated input speed. |
| Efficiency | L1 95%; L2 92% | Values from the corresponding stage drawings. |
| Operating Temperature | -10 to +90 C | Supplied drawing specification. |
| Maximum Axial Force | 600 N | Confirm load position and duty cycle for the application. |
| Maximum Radial Force | 1530 N | Confirm load position and duty cycle for the application. |
| Weight | L1 2.05 kg; L2 3.15 kg | Drawing tolerance +/-3%. |
| Typical Interface | 11-50-70; 14-50-70; 8-38.1-66.7 mm | Shaft-pilot-PCD. The L1 8 mm drawing dimension shows PCD66.7, but its footer says66.4; confirm this interface before ordering. |
| IP Rating | IP65 | Supplied drawing specification. |
| Service Life | 20000 h | Drawing specification; actual life depends on operating conditions. |
Need a specification that is not listed? Contact us with the required configuration.
Find PAMG060 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PAMG060 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PAMG060 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PAMG060.