PRECISION DRIVE
Home / Applications / KRV Servo Hypoid Gearboxes for Custom Tracked Chassis
APPLICATION
KRV Servo Hypoid Gearboxes for Custom Tracked Chassis
KRV servo hypoid gearboxes can be used for right-angle drives on custom tracked chassis equipment.
APPLICATION DETAILS
Application Description
KRV servo hypoid gearboxes can be used in right-angle drive arrangements for custom tracked chassis equipment. Check the vehicle load, target travel speed, slope, duty, motor interface and available space when selecting the configuration.
Application scene: custom tracked chassis equipment.
Motor Servo motor
Recommended Model KRV050 / KRV075
Key Parameters Check by Project
Operating Conditions Use Actual Equipment Requirements
WORKING CONDITIONS
What Matters Most When Selecting for This Application?
- Provide Equipment Load, Lever Arm & Center of Gravity.
- Provide Target Speed, Motion Angle, Acceleration/Deceleration Time & Cycle Time.
- Provide the Full Motor Model & Shaft Diameter, Pilot Diameter, Interface Dimensions Including Hole Spacing.
CONTACT
Location & Contact
Dongguan Hanrui Automation Technology Co., Ltd.
6th Floor, No. 172 Chonghuan Middle Road, Shijie Town, Dongguan, China
Phone: +86 769 8281 3091
Email: oliver@andantexcn.com
SELECTION CHECKLIST
Information to Include in Your Selection Request
LoadWeight, Dimensions, Lever Arm, Center of Gravity
MotionTarget Speed, Angle, Travel, Acceleration & Deceleration Time
Cycle TimeTime per Cycle, Start/Stop Frequency, Daily Operating Hours
AccuracyPositioning Accuracy, Repeatability, Allowable Backlash
MotorPower, Model, Shaft Diameter, Shaft Length, Pilot Diameter, Hole Spacing
InstallationSpace, Orientation, Radial/Axial Force, Offset Load