PRECISION DRIVE
PBE060 Hollow Output Planetary Gearbox
PBE060 is a compact planetary gearbox with a 10 mm keyed output bore and a 14-50-70 motor interface. Compare L1/L2 drawings and available STEP files before selection.
PBE060 is an inline planetary gearbox with a keyed hollow output. Its L1 and L2 drawings show a 14 mm motor shaft interface, 50 mm pilot and 70 mm mounting PCD. Rated L1 output torque ranges from 16 to 40 N·m, depending on ratio. Check the driven shaft, mounting dimensions and ratio-specific ratings on the selected drawing.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PBE Round-Flange Hollow-Output Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 060 | Model Specifications |
| Output Structure / Flange Type | Inline planetary gearbox; keyed output bore; round locating flange | — |
| Gear Ratio | L1: 3/4/5/7/10; L2: see ratio table on the selected drawing | Source: supplied PBE060 L1/L2 drawings, edition 22A/01. Ratio and torque are configuration dependent. |
| Rated Output Torque | 16–40 N·m; ratio dependent | — |
| Maximum Torque | 1.5 × rated torque | — |
| Backlash | L1 ≤8 arcmin; L2 ≤12 arcmin | — |
| Maximum Input Speed | 8000 rpm | — |
| Rated Speed | 4000 rpm (input) | — |
| Efficiency | L1 96%; L2 94% | — |
| Operating Temperature | −10 to +90 °C | — |
| Maximum Axial Force | L1 220 N; L2 230 N | — |
| Maximum Radial Force | 240 N | — |
| Weight | L1 0.95 kg; L2 1.2 kg (±3%) | — |
| Typical Interface | Input shaft 14 mm / pilot 50 mm / PCD 70 mm; output bore 10 mm | — |
| IP Rating | IP65 | — |
| Service Life | 20000 h (drawing reference) | — |
Need a specification that is not listed? Contact us with the required configuration.
Find PBE060 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PBE060 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PBE060 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PBE060.