Skip to content

PBE060 Hollow Output Planetary Gearbox

PBE060 is a compact planetary gearbox with a 10 mm keyed output bore and a 14-50-70 motor interface. Compare L1/L2 drawings and available STEP files before selection.

ANDANTEX PRODUCT

The ANDANTEX PBE060 connects to a driven shaft through a keyed output bore. The L1 and L2 drawings show a 14 mm motor shaft interface, 50 mm input pilot and 70 mm mounting PCD. Confirm shaft length, mounting threads, key dimensions and clearance against the selected drawing. Drawing 22A/01 lists L1 ratios 3/4/5/7/10 with rated output torque 27/40/40/34/16 N·m respectively. L2 torque depends on the selected ratio; do not apply the peak rating to every ratio. L1 backlash is ≤8 arcmin and efficiency 96%; L2 backlash is ≤12 arcmin and efficiency 94%. Suitable installations must be checked against the actual radial/axial load, input speed and operating duty. Send the motor drawing, required ratio, driven-shaft dimensions and load cycle for interface confirmation. The main image is a representative PBE series product image. Use the configuration-specific drawings for dimensions and interfaces. STEP downloads contain the original model in a ZIP archive.

PBE060 Product Model
PBE Round-Flange Hollow-Output Gearbox Product Series
L1: 3/4/5/7/10; L2: see ratio table on the selected drawing Gear Ratio
16–40 N·m; ratio dependent Rated Output Torque
L1 ≤8 arcmin; L2 ≤12 arcmin Backlash
240 N Maximum Radial Force
8000 rpm Maximum Input Speed
L1 96%; L2 94% Efficiency

Key Technical Specifications

AND-PD-PBE060-001 Technical Data SheetPBE Round-Flange Hollow-Output GearboxStandard Planetary Gearbox
ItemParametersDescription
Product SeriesPBE Round-Flange Hollow-Output GearboxStandard Planetary Gearbox
Specifications / Frame Size060Model Specifications
Output Structure / Flange TypeInline planetary gearbox; keyed output bore; round locating flange—
Gear RatioL1: 3/4/5/7/10; L2: see ratio table on the selected drawingRatio and torque depend on the selected configuration.
Rated Output Torque16–40 N·m; ratio dependent—
Maximum Torque1.5 × rated torque—
BacklashL1 ≤8 arcmin; L2 ≤12 arcmin—
Maximum Input Speed8000 rpm—
Rated Speed4000 rpm (input)—
EfficiencyL1 96%; L2 94%—
Operating Temperature−10 to +90 °C—
Maximum Axial ForceL1 220 N; L2 230 N—
Maximum Radial Force240 N—
WeightL1 0.95 kg; L2 1.2 kg (±3%)—
Typical InterfaceInput shaft 14 mm / pilot 50 mm / PCD 70 mm; output bore 10 mm—
IP RatingIP65—
Service Life20000 h (drawing reference)—

Need a specification that is not listed? Contact us with the required configuration.

MOTOR INTERFACE FINDER

Find PBE060 drawings by motor interface

Select the motor interface and reduction stage to find the matching drawing and STEP model.

QUICK MATCH

Match your motor dimensions

Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.

Select Interface ResourcesAfter Publishing Engineering Resources, Filter by Actual Motor Dimensions.
Check the motor drawing for shaft diameter and length, keyway, pilot diameter, mounting hole spacing, threads and flange thickness.
ENGINEERING FILES

PBE060 drawings and STEP models

Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.

0 2D + 3D File
0 Interface / Stage Combinations
0 Complete Resource Set
Loading Resources…Choose a configuration to review the available files.
No matching configuration? Submit your motor drawing
DOWNLOAD CHECK

Check the configuration before downloading

Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.

Request Engineering Review
FAQ

Selection FAQ

PBE060 Can I Order by Model Number Alone?

First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.

Drawings and 3D How to Confirm Models?

Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.

What If My Specifications Are Incomplete?

Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.

Need help selecting a gearbox?

Send the required ratio, motor drawing, load and installation details for PBE060.

Generate RFQ
Need an OEM solution? Explore labels, packaging & interface customization
2D DRAWING PREVIEW

PBE060 Mounting Dimensions

PBE060 2D Mounting Drawing Preview

Download Original 2D Drawings

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.