PRECISION DRIVE
80ST-JC03925 Standard AC Servo Motor
The 80ST-JC03925 is a 1000 W, 220 V AC servo motor with an 80 mm flange and a 17-bit single-turn absolute encoder.
The 80ST-JC03925 servo motor has an 80 mm flange and a 19 mm shaft.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | Standard Type | AC Servo Motor |
| Specifications / Frame Size | 80 mm | Model Specifications |
| Rated Power | 1000 W | — |
| Motor Flange | 80 mm | — |
| Typical Interface | Ø19 × 35 mm shaft; Ø70 mm pilot; 4 × Ø6.5 on Ø90 mm bolt circle | — |
| IP Rating | IP65 | — |
Need a specification that is not listed? Contact us with the required configuration.
Motor Mounting and Drive Compatibility
Select the motor and servo drive as a pair. Confirm the supply voltage, rated current, feedback or encoder, brake requirement and control interface using the exact model documents.
When connecting a gearbox, check the motor shaft diameter and usable length, keyway, locating pilot, mounting hole pattern and flange dimensions. Rated power or flange size alone does not confirm mechanical fit.
80ST-JC03925 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Motor Quote or Compatibility Review?
Send the motor specification, required quantity, load and speed requirements, and the intended servo drive. Include the motor drawing when available.
Request a Motor Quote