PRECISION DRIVE
KRV050 servo hypoid gearbox with 110ST motor interface; PDF drawing and 3D STEP model available.
KRV050 is part of the ANDANTEX KRV servo hypoid gearbox series. Available engineering configuration: KRV050-110ST-19-95-130. The supplied drawing specifies an input bore of Ø19 mm, a Ø95 mm pilot and a Ø130 mm mounting PCD with 4 × Ø8.7 through holes. Download the matching PDF drawing and STEP model below. Consult the KRV / KRV-B catalog for selection information. The reduction ratio is not specified in this configuration drawing.
| Item | Parameters | Description |
|---|---|---|
| Product Series | KRV Servo Hypoid Gearbox | Servo Hypoid Gearbox |
| Specifications / Frame Size | 050 | Model Specifications |
| Example Model | KRV050-110ST-19-95-130 | — |
| Typical Interface | 19-95-130 | 110ST motor interface; input bore Ø19 mm, pilot Ø95 mm, PCD Ø130 mm, 4 × Ø8.7 through holes. |
Need a specification that is not listed? Contact us with the required configuration.
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
Download catalogs and manuals applicable to this product. For mounting dimensions and CAD models, see the 2D / 3D section below.
67-page ANDANTEX catalog for the KRV and KRV-B servo hypoid gearbox series. Includes selection data, dimensions and frame aliases. Contact: +86 769-82813091; oliver@andantexcn.com.
View / Download PDFANDANTEX KRV050 servo hypoid gearbox installation drawing for the 110ST motor interface: input bore Ø19 mm, pilot Ø95 mm and mounting PCD Ø130 mm. Matching 3D STEP is available from Motor Interface Matching: select KRV and enter 19 / 95 / 130 mm. The PDF and STEP both carry the ANDANTEX logo.
View / Download PDFChoose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsCheck Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Send the required ratio, motor drawing, load and installation details for KRV050.
Get a Quote
Share your email and requirements for pricing or selection support.
