PRECISION DRIVE
PVBF060 Right-Angle Hollow-Output Planetary Gearbox
A compact right-angle planetary gearbox with a keyed output bore and a 14-50-70 motor interface.
PVBF060 combines a 90-degree drive arrangement with a keyed output bore. The supplied drawings cover L1 and L2 configurations with a Ø10 output bore and an L1 option with a Ø11 bore. Verify the output bore, keyway and engagement depth, plus the Ø14 motor shaft, Ø50 pilot and Ø70 bolt circle, before selecting a configuration. The Ø11 drawing identifies a thin keyway wall and requires signed drawing approval. Torque ratings depend on ratio and stage; use the matching drawing for installation. The product image is a PVBF series reference.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PVBF Right-Angle Square-Flange Hollow-Output Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 060 | Model Specifications |
| Output Structure / Flange Type | 90° right-angle drive; keyed output bore | Ø10 base configuration; Ø11 L1 option |
| Gear Ratio | L1: 3, 4, 5, 7, 10; L2: 15, 20, 25, 35, 40, 50, 70, 100 | Use the corresponding stage drawing |
| Rated Output Torque | 16–40 Nm | L1: 27/40/40/34/16 Nm at ratios 3/4/5/7/10. L2: 27/40/40/27/40/40/34/16 Nm at ratios 15/20/25/35/40/50/70/100. |
| Backlash | L1 ≤8; L2 ≤12 arcmin | 22A/01 |
| Maximum Input Speed | 8000 rpm | Input speed |
| Rated Speed | 4000 rpm | Rated input speed |
| Motor Flange | 60 mm | 14-50-70 interface |
| Operating Temperature | -20 to +80 °C | 22A/01 |
| Typical Interface | 14-50-70 mm | Motor shaft diameter – pilot diameter – bolt-circle diameter |
| IP Rating | IP65 | 22A/01 |
| Service Life | 20000 h | 22A/01 |
Need a specification that is not listed? Contact us with the required configuration.
Find PVBF060 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PVBF060 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PVBF060.