PLF120 Standard Planetary Gearbox

PLF120 is a square-flange standard planetary gearbox in the PLF series.

ANDANTEX PRODUCT

Choose the reduction stage, ratio and motor interface, then check the drawing for the required output. Custom versions have separate specifications. The L2 16:1 option is not confirmed for PLF120; request engineering confirmation before specifying it.

Submit Selection Requirements View All Sizes in This Series

PLF120 Product Model

PLF Square-Flange Spur Gearbox Product Series

PLF120-5-S2-P2 Example Model

L1：3/4/5/7/10；L2：12/15/20/25/28/30/35/40/50/70/100 Gear Ratio

86–210 Nm( By Ratio) Rated Output Torque

Standard Interface L1 ≤8; L2 ≤12 arcmin Backlash

1240 N Maximum Radial Force

6000 rpm Maximum Input Speed

L1 96%；L2 94% Efficiency

Key Technical Specifications

AND-PD-PLF120-001 Technical Data SheetPLF Square-Flange Spur GearboxStandard Planetary Gearbox

Item	Parameters	Description
Product Series	PLF Square-Flange Spur Gearbox	Standard Planetary Gearbox
Specifications / Frame Size	120	Model Specifications
Example Model	PLF120-5-S2-P2	120 Frame Size / 5:1 / P2
Gear Ratio	L1：3/4/5/7/10；L2：12/15/20/25/28/30/35/40/50/70/100	L2 The Table Also Includes 16 Compared with, But the Model in That Row Is Listed as PLF1120, Verify before Confirmation
Rated Output Torque	86–210 Nm( By Ratio)	L1: 3=161, 4/5=210, 7=170, 10=86; L2: 12/15/30=161, 20/25/28/35/40/50=210, 70=170, 100=86 Nm; 16 Ratio Requires Verification
Maximum Torque	Of the Rated Output Torque 1.5 Times	Varies with Rated Output Torque at Each Ratio
Backlash	Standard Interface L1 ≤8; L2 ≤12 arcmin	Some Custom Outputs L1 Drawing Annotation ≤10 or ≤16; Use the Corresponding Engineering Drawing
Maximum Input Speed	6000 rpm	Maximum Input Speed Specified in the Drawing
Rated Input Speed	3500 rpm	Rated Input Speed Specified in the Drawing
Output Flange / Square Size	120 mm (cast: 122 mm)	Square output flange dimension from https://www.andantexcn.com/wp-content/themes/andantex-local-test/site/assets/downloads/plf120/v11/2d/plf120-interface-l1-19-55p5-125p9-2D.jpg. Reference configuration; custom structures may differ.
Efficiency	L1 96%；L2 94%	Two-Stage Efficiency Differs
Operating Temperature	Standard Interface -10℃～+90℃	Some Custom Interface Drawings Specify -20℃～+80℃; Use the Specific Interface Drawing
Maximum Axial Force	1000 N	2D Maximum Axial Force Specified in the Drawing
Maximum Radial Force	1240 N	2D Maximum Radial Force Specified in the Drawing
Weight	L1 7.08 kg；L2 8.7 kg	As Shown 22-95-115 Motor Interface, ±3%; Confirm Other Interfaces against Their Engineering Drawings
IP Rating	IP65	Verified L1/L2 Standard Interface Drawing
Service Life	20000 h	Service Life Specified in the Drawing

Need a specification that is not listed? Contact us with the required configuration.

MOTOR INTERFACE FINDER

Find PLF120 drawings by motor interface

Select the motor interface and reduction stage to find the matching drawing and STEP model.

Find Matching Motor Interfaces across Models

Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.

Search Interfaces across Models Submit Interface Specifications

QUICK MATCH

Match your motor dimensions

Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.

Motor TypeNumber of StagesMotor Shaft DiameterLocating PilotMounting Hole Spacing PCD

Select Interface ResourcesAfter Publishing Engineering Resources, Filter by Actual Motor Dimensions.

Check the motor drawing for shaft diameter and length, keyway, pilot diameter, mounting hole spacing, threads and flange thickness.

ENGINEERING FILES

PLF120 drawings and STEP models

Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.

0 2D + 3D File

0 Interface / Stage Combinations

0 Complete Resource Set

Loading Resources…Choose a configuration to review the available files.

No matching configuration? Submit your motor drawing

DOWNLOAD CHECK

Check the configuration before downloading

Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.

Request Engineering Review

APPLICATIONS

Typical applications for PLF120

View All Applications

Heavy-Duty ConveyingView Application & Selection Priorities Packaging EquipmentView Application & Selection Priorities

FAQ

Selection FAQ

What needs confirmation before selecting PLF120?

Check the exact reduction stage and ratio, standard or custom-output conditions, and motor interface. Resolve the source entries flagged on this page before treating a configuration as confirmed. Also review acceleration and deceleration time, inertia and offset loads. Use the PLF series comparison to review other model options without assuming that their limits are interchangeable.

Can PLF120 be configured for a different motor brand?

Review the actual motor drawing first. Confirm the shaft diameter and length, pilot diameter, key dimensions and mounting-hole arrangement before determining the input flange and bushing configuration. Motor brand or power alone does not confirm fit. Use the motor-interface checklist to prepare the dimensions.

Need help selecting a gearbox?

Send the required ratio, motor drawing, load and installation details for PLF120.

Generate RFQ