PRECISION DRIVE
PLE040 Standard Planetary Gearbox
PLE040 standard planetary gearbox with L1 and L2 stages.
Compare three motor interfaces, ratio-dependent torque and matching 2D drawings and 3D STEP files.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLE Round-Flange Spur Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 40 | Model Specifications |
| Example Model | PLE040-5-S2-P2 | Example; Confirm the model against the ratio and motor interface |
| Gear Ratio | L1: 3/4/5/7/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100 | The drawings list 12 and 15 as secondary choices. Availability and torque must be confirmed for the selected interface. The 5-22-43.8 L1 and L2 drawings both show overall length 103 mm; verify stage and dimensions before approving the 2D/3D pair. |
| Rated Output Torque | L1: 10–16 Nm; L2: 10–16 Nm | L1 ratio: torque (Nm): 4:16; 5:15; 7:12; 10:10. Ratio 3 is 16 Nm on the 5-22-43.8 drawing but unspecified on the 8-30-45 and 8-30-46 drawings. L2: 16/25/28/40:16; 20/50:15; 35/70:12; 100:10. Ratios 12/15/30 have no torque value; confirm before selection. |
| Maximum Torque | 1.5 × rated output torque | Drawing-listed maximum; confirm peak duration and duty cycle. |
| Backlash | L1: ≤8 arcmin; L2: ≤12 arcmin | Confirm the selected configuration before ordering. |
| Maximum Input Speed | 8000 rpm | Confirm the selected configuration before ordering. |
| Rated Input Speed | 4500 rpm (input) | Rated input speed, not output speed. |
| Efficiency | L1: 96%; L2: 94% | Confirm the selected configuration before ordering. |
| Operating Temperature | -10 to +90 °C | Confirm the selected configuration before ordering. |
| Maximum Axial Force | 150 N | Confirm combined radial/axial loads and load position. |
| Maximum Radial Force | 185 N | Confirm combined radial/axial loads and load position. |
| Weight | L1: 0.43 kg; L2: 0.65 kg | Drawing tolerance ±3%; reference configurations only. |
| IP Rating | IP65 | Confirm the selected configuration before ordering. |
| Service Life | 20,000 h | Drawing-listed value; actual life depends on operating conditions. |
Need a specification that is not listed? Contact us with the required configuration.
Find PLE040 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PLE040 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PLE040 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PLE040.