PRECISION DRIVE
TPG060 Precision Planetary Gearbox
The ANDANTEX TPG060 precision planetary gearbox has a 60 mm body and a keyed 14 mm output shaft.
L1 and L2 configurations share the 14-50-70 motor interface, with overall lengths of 115 mm and 139.5 mm respectively. Rated output torque is 30-45 Nm depending on ratio. Select the exact stage and ratio using the corresponding engineering drawing. The product photo is a representative PLE-series image approved for the same exterior appearance; TPG060 dimensions and ratings follow the supplied TPG drawings.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | TPG Economical Helical Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 060 | Model Specifications |
| Output Structure / Flange Type | Keyed shaft output, diameter 14 mm h6; output pilot 40 mm g6 | Output PCD 52 mm with 4 x M5, depth 10 mm. Shaft projection 28.5 mm; key length 25 mm and width 5 mm. Overall length: L1 115 mm; L2 139.5 mm. |
| Example Model | TPG060-5-S2-P2 | — |
| Gear Ratio | L1: 3, 4, 5, 7, 10; L2: 12, 15, 16, 20, 25, 28, 30, 35, 40, 50, 70, 100 | L2 ratios 12 and 15 are marked as secondary choices in the supplied drawing. |
| Rated Output Torque | 30-45 Nm | L1: 3 = 40 Nm; 4/5/7 = 45 Nm; 10 = 30 Nm. L2: 12 = 40 Nm; 15/16/30/35/40/50/70 = 45 Nm; 20/25/28 = 43 Nm; 100 = 30 Nm. |
| Maximum Torque | 1.5 x rated torque | — |
| Backlash | L1: <=3 arcmin; L2: <=7 arcmin | — |
| Maximum Input Speed | 8000 rpm | — |
| Rated Speed | 4000 rpm | Rated input speed, not output speed. |
| Motor Flange | 60 mm square; locating pilot 50 mm; mounting PCD 70 mm | — |
| Efficiency | L1: 96%; L2: 94% | — |
| Operating Temperature | -10 to +90 C | — |
| Maximum Axial Force | 630 N | — |
| Maximum Radial Force | 1530 N | — |
| Weight | L1: 1.25 kg; L2: 1.75 kg | Drawing tolerance +/-3%. |
| Typical Interface | 14-50-70 | Input shaft diameter 14 mm, shaft length 30 mm; motor pilot 50 mm x 3 mm; motor mounting holes 4 x diameter 4.5 mm on PCD 70 mm. Gearbox input tapped holes: 4 x M4, depth 10 mm. |
| IP Rating | IP65 | — |
| Service Life | 20000 h | Drawing-stated value; actual life depends on operating conditions. Drawing noise limit <=58 dB; synthetic grease lubrication. |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Find by Interface Dimensions TPG060 Drawings
Choose the motor interface and reduction stage that match your configuration. Each drawing and STEP file applies to its stated variant.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Filter by motor type, reduction stage and the dimensions on your motor drawing. Matching configurations show their available drawings and STEP files; missing files are marked.
TPG060 2D / 3D Engineering Resources
Choose the files for the exact model, motor interface and reduction stage. Dimensional drawings may be images or PDF; 3D models are STEP files.
Check the Model before Downloading, Size & Interface
Check the complete model and configuration against the approved engineering drawing. Custom inputs, outputs and flanges require their own matching files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Quote or Engineering Review?
Submit TPG060 Gear Ratio for, Load & Installation Requirements.