PRECISION DRIVE
PAG090 Precision Planetary Gearbox
View specifications, mounting dimensions and available engineering files for the PAG090 Precision Planetary Gearbox.
Review the technical specifications below, then select the motor interface and engineering files for your configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PAG Square-Flange Helical Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 90 | Model Specifications |
| Gear Ratio | 5 | The series also offers 3/4/7/10 And two-stage ratios |
| Rated Output Torque | 130 Nm | Verify continuous operation for the chosen ratio |
| Backlash | 3 arcmin | Low-Backlash Precision Applications |
| Maximum Input Speed | 8000 rpm | Monitor temperature rise during continuous high-speed operation |
| Maximum Axial Force | 1300 N | Check carefully when thrust loads are present |
| Maximum Radial Force | 3250 N | Calculate using the load application point |
| Torsional Rigidity | 12 Nm/arcmin | Affects dynamic positioning and resistance to torsional deformation |
| Typical Interface | Shaft Diameter 19 / Pilot Diameter 70 / Hole Spacing 90 | Confirm against the actual motor drawing |
Need a specification that is not listed? Contact us with the required configuration.
Find PAG090 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PAG090 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Typical applications for PAG090
Selection FAQ
PAG090 Can I Select by Motor Power Alone?
No. Also consider the output speed, Load Torque, Peak Torque, Inertia, Confirm acceleration/deceleration time and motor interface together.
How to Verify the Motor Interface?
At minimum, check shaft diameter, Shaft Length/Keyway, Pilot Diameter & Mounting Hole Spacing, Confirm threads and flange thickness when necessary.
2D / 3D How to Obtain Resources?
Open the current resource page from the engineering resources section; For actual projects, confirm the final drawing version for the specific motor interface.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PAG090.