PRECISION DRIVE
PVFH040 Double-Shaft Output Right-Angle Gearbox
The ANDANTEX PVFH040 is a right-angle gearbox with coupling-bore input and double-shaft output.
Select a stage and motor interface below to preview the dimensional drawing and download the available 2D PDF and 3D STEP files. Confirm torque, speed, shaft loads and mounting dimensions for the selected configuration. Both output sides can drive loads simultaneously. The rated output torque is the combined limit for both sides, not a separate full rating for each side. Confirm the load on each side for the selected configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PVFH Double-Shaft Output Right-Angle Gearbox | Right Angle Gearbox |
| Specifications / Frame Size | 040 | Model Specifications |
| Output Structure / Flange Type | Coupling-bore input; double-shaft output; right-angle transmission | Both output sides can connect loads simultaneously. Match the mounting and connection dimensions to the selected drawing. |
Need a specification that is not listed? Contact us with the required configuration.
Find PVFH040 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PVFH040 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PVFH040 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PVFH040.