Skip to content
ANDANTEX / PRECISION TRANSMISSIONSelection Support / 3D Resources / Custom Engineering

PVFD Single-Shaft Right-Angle Gearboxes

ANDANTEX PVFD right-angle gearboxes use coupling-bore input and single-shaft output. Select a model to review motor interfaces, dimensional drawings and available 3D STEP files.

Product Category

All Product Categories
Standard Planetary Gearbox
Precision Planetary Gearbox
Hollow Rotary Table
Right Angle Gearbox
AC Servo Motor
Cam Hollow Rotary Table
Harmonic Reducer
Worm Gearbox
Servo Hypoid Gearbox
Brushless DC Motor
Integrated Applications

Model / Specifications

← BackRight Angle Gearbox

For motor connection terminology and interface checks, read the guide to coupling-bore, splined-bore, keyed-bore and shaft inputs.

Selecting a PVFD Single-Shaft Output Gearbox

PVFD combines coupling-bore input for a servo motor with one output shaft. Start with this series when the machine layout requires a shaft connection on one output side. Open a model above to compare its actual dimensions and available technical resources.

  • Output connection: match the gearbox shaft diameter and usable length to the driven coupling or hub. Confirm the specified fastening and locating features from the drawing.
  • Installation space: check the right-angle motor position, gearbox mounting faces and room to assemble or service the output connection.
  • External loading: describe any pulley, pinion or other overhung component, including its position and radial or axial loads. Request the corresponding model limits before final selection.

Motor Matching and Information for Selection

Provide the complete servo motor model and drawing. Check shaft diameter, usable shaft length, locating pilot and mounting-hole pattern using the motor interface dimensions checklist. Motor power alone does not confirm mechanical compatibility.

Include the required ratio or output speed, working and peak torque requirements, acceleration/deceleration cycle and installation drawing. Confirm available ratios and ratings for the exact model. Request a PVFD model and drawing review.

Compare Other Output Arrangements

If the required output connection differs, compare PVFH double-shaft output and PVFGB single-bore output. Review the right-angle gearbox connection comparison before choosing a series. A different series requires a fresh check of dimensions and load ratings.

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.