PRECISION DRIVE
AGV100-8 AGV Integrated Gearbox Module | 8:1 for AGV Drive Wheels
Integrated reduction module for AGV drive wheels, with an 8:1 ratio and 14-50-70 motor interface.
The AGV100-8 is an integrated drive reduction module for AGV vehicles. Its 8:1 ratio gives an output speed of 375 rpm at 3,000 rpm input. The supplied drawing specifies a 14-50-70 motor interface, 20 Nm rated torque and 41 Nm maximum torque. Confirm the motor and installation dimensions against the drawing for the intended configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | AGV Integrated Drive Modules | Integrated Applications |
| Specifications / Frame Size | 100 | Model Specifications |
| Confirmed Typical Applications | AGV vehicle drive wheel | — |
| Gear Ratio | 8:1 | — |
| Rated Output Torque | 20 Nm | — |
| Maximum Torque | 41 Nm | — |
| Typical Interface | 14-50-70, 4 × M5 | — |
Need a specification that is not listed? Contact us with the required configuration.
Find AGV100-8 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
AGV100-8 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for AGV100-8.