NTF200 Combined Hollow Rotary Table
ANDANTEX NTF200 provides a combined right-angle input layout and hollow rotary output for automated workstations.
The central passage helps route fixture cables and air lines, while the input assembly offers flexibility when positioning the motor. Check installation clearance against the complete assembly drawing and size the drive for the rotating fixture, cycle and load offset.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | NTF Combined Hollow Rotary Table | Hollow Rotary Table |
| Specifications / Frame Size | 200 | Model Specifications |
Need a specification that is not listed? Contact us with the required configuration.
Find NTF200 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
NTF200 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
NTF200 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for NTF200.


