Skip to content

PBE090 Hollow Output Planetary Gearbox

PBE090 uses a 15 mm keyed output bore. Available drawings cover L1/L2 versions with 14 mm or 19 mm motor shaft interfaces; pilot and mounting PCD vary by version.

ANDANTEX PRODUCT

The ANDANTEX PBE090 is an inline planetary gearbox with a keyed hollow output and a round output locating flange. Compare the 14-73-98.44 and 19-70-90 motor-interface drawings before ordering; shaft length, pilot, mounting PCD and mounting threads must match the actual motor. L1 ratios 3/4/5/7/10 have rated output torque 96/122/122/95/56 N·m respectively. L1 backlash is ≤8 arcmin and efficiency 96%; L2 backlash is ≤12 arcmin and efficiency 94%. Ratings depend on ratio and configuration. For the 14 mm interface, confirm the applicable mounting PCD (98.44 or 98.4 mm) and configuration against the drawing before manufacture. A STEP model for L1 19-70-90 is not available. Two different L2 14 mm STEP variants are listed separately and are not interchangeable without checking the configuration. Provide the motor drawing, driven shaft dimensions, required ratio, load and duty cycle for selection. The main image is a representative PBE series product image. Use the configuration-specific drawings for dimensions and interfaces. STEP downloads are packaged in ZIP format.

PBE090 Product Model
PBE Round-Flange Hollow-Output Gearbox Product Series
L1: 3/4/5/7/10; L2: see selected drawing Gear Ratio
56–122 N·m; ratio dependent Rated Output Torque
L1 ≤8 arcmin; L2 ≤12 arcmin Backlash
450 N Maximum Radial Force
6000 rpm Maximum Input Speed
L1 96%; L2 94% Efficiency

Key Technical Specifications

AND-PD-PBE090-001 Technical Data SheetPBE Round-Flange Hollow-Output GearboxStandard Planetary Gearbox
ItemParametersDescription
Product SeriesPBE Round-Flange Hollow-Output GearboxStandard Planetary Gearbox
Specifications / Frame Size090Model Specifications
Output Structure / Flange TypeInline planetary gearbox; 15 mm keyed output bore—
Gear RatioL1: 3/4/5/7/10; L2: see selected drawingConfirm the applicable mounting PCD (98.44 or 98.4 mm) and ratios against the selected drawing before ordering.
Rated Output Torque56–122 N·m; ratio dependent—
Maximum Torque1.5 × rated torque—
BacklashL1 ≤8 arcmin; L2 ≤12 arcmin—
Maximum Input Speed6000 rpm—
Rated Speed3500 rpm (input)—
EfficiencyL1 96%; L2 94%—
Operating Temperature−10 to +90 °C—
Maximum Axial Force430 N—
Maximum Radial Force450 N—
WeightL1 3.06 kg; L2 3.86 kg (±3%)—
Typical Interface14 mm / pilot 73 mm / PCD 98.4 mm (drawing); 19 mm / pilot 70 mm / PCD 90 mm—
IP RatingIP65—
Service Life20000 h (drawing reference)—

Need a specification that is not listed? Contact us with the required configuration.

MOTOR INTERFACE FINDER

Find PBE090 drawings by motor interface

Select the motor interface and reduction stage to find the matching drawing and STEP model.

QUICK MATCH

Match your motor dimensions

Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.

Select Interface ResourcesAfter Publishing Engineering Resources, Filter by Actual Motor Dimensions.
Check the motor drawing for shaft diameter and length, keyway, pilot diameter, mounting hole spacing, threads and flange thickness.
ENGINEERING FILES

PBE090 drawings and STEP models

Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.

0 2D + 3D File
0 Interface / Stage Combinations
0 Complete Resource Set
Loading Resources…Choose a configuration to review the available files.
No matching configuration? Submit your motor drawing
DOWNLOAD CHECK

Check the configuration before downloading

Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.

Request Engineering Review
FAQ

Selection FAQ

PBE090 Can I Order by Model Number Alone?

First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.

Drawings and 3D How to Confirm Models?

Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.

What If My Specifications Are Incomplete?

Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.

Need help selecting a gearbox?

Send the required ratio, motor drawing, load and installation details for PBE090.

Generate RFQ
Need an OEM solution? Explore labels, packaging & interface customization
2D DRAWING PREVIEW

PBE090 Mounting Dimensions

PBE090 2D Mounting Drawing Preview

Download Original 2D Drawings

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.