PLF028 Standard Planetary Gearbox
View specifications, mounting dimensions and available engineering files for the PLF028 Standard Planetary Gearbox.
Review the technical specifications below, then select the motor interface and engineering files for your configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLF Square-Flange Spur Gearbox | Standard Planetary Gearbox |
| Specifications / Frame Size | 28 | Model Specifications |
| Example Model | PLF028 L1 H / L2 H | H and X Are Different Structures, Drawings Are Managed Separately |
| Gear Ratio | L1:3/4/5/7/10;L2:12/15/16/20/25/28/30/35/40/50/70/100 | H Structure Drawing: L2 of 12, 15 As an Alternative; If the Original Table States "/", Do Not Recommend This Size as Having a Confirmed Rated Torque |
| Rated Output Torque | 3–9 Nm( Only H Ratios Specified in the Drawing) | H Structure: L1 4=9, 5=8.5, 7=5, 10=3; ratio 3 not specified; L2 16/20/28/40=9, 25/35/50=8.5, 70=5, 12/15/30/100 not specified. X structure: values on request |
| Backlash | H Structure L1 ≤12 arcmin; L2 ≤15 arcmin | X structure: refer to its own drawing. L2-X specifications differ significantly from the H structure and are not general specifications |
| Maximum Input Speed | H Structure 6000 rpm | H structure L1/L2 per drawing; for L2-X 8000 rpm, contact our engineers to confirm |
| Rated Input Speed | H Structure 3000 rpm | L1-X drawing also lists 3000 rpm; L2-X values differ, contact our engineers to confirm |
| Output Flange / Square Size | 28.6 mm (H) | Reference configuration; custom structures may differ. |
| Efficiency | H Structure L1 96%; L2 94% | Refer to the drawing for the selected structure and stage count |
| Operating Temperature | H Structure L1 -15℃~+90℃; L2 -10℃~+90℃ | L1 and L2 values differ; see the respective drawing |
| Maximum Axial Force | H Structure 80 N | L1/L2 H-structure drawing value; X structure on request |
| Maximum Radial Force | H Structure 150 N | L1/L2 H-structure drawing value; X structure on request |
| Weight | H Structure L1 0.16 kg; L2 0.25 kg | H-structure drawing value; for L2-X, contact our engineers to confirm |
| IP Rating | H Structure L1 IP65; L2 IP54 | L1-X and L2-X drawings list IP65; L2-X specifications differ significantly from the H structure, drawings on request |
| Service Life | H Structure 20000 h | Per L1/L2 H-structure 2D drawing |
Need a specification that is not listed? Contact us with the required configuration.
Find PLF028 drawings by motor interface
Select the motor interface and reduction stage to find the matching drawing and STEP model.
Enter the motor shaft diameter, pilot diameter and mounting-hole spacing to compare input interfaces across models.
Match your motor dimensions
Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.
PLF028 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
PLF028 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for PLF028.






