Skip to content

PLM180 Precision Planetary Gearbox

PLM180 precision planetary gearbox with L1/L2 motor interfaces and a custom 50 mm output-shaft variant.

ANDANTEX PRODUCT

Download available 2D drawings, PDF and STEP files.

PLM180 Product Model
PLM Round-Body Square-Flange Helical Gearbox Product Series
L1: 3/4/5/7/8/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100 Gear Ratio
L1: 770–1100 Nm; L2: 770–1100 Nm Rated Output Torque
L1: ≤3 arcmin; L2: ≤5 arcmin Backlash
14500 N Maximum Radial Force
6000 rpm Maximum Input Speed
L1: 95%; L2: 90% Efficiency

Key Technical Specifications

AND-PD-PLM180-001 Technical Data SheetPLM Round-Body Square-Flange Helical GearboxPrecision Planetary Gearbox
ItemParametersDescription
Product SeriesPLM Round-Body Square-Flange Helical GearboxPrecision Planetary Gearbox
Specifications / Frame Size180Model Specifications
Gear RatioL1: 3/4/5/7/8/10; L2: 12/15/16/20/25/28/30/35/40/50/70/100Reference configurations: PLM180-L1-38-180-215.jpg; PLM180-L2-35-114.3-200.jpg. Values below apply to these drawings; other motor interfaces and custom outputs require separate confirmation.
Rated Output TorqueL1: 770–1100 Nm; L2: 770–1100 NmRatio: torque (Nm). L1 — 3/4:880; 5/7:1100; 10:770; ratio 8 torque not specified. L2 — 12/15/30:880; 20/25/28/35/40/50/70:1100; 100:770. L2 ratio 16 torque is not specified in the reference drawing; confirm before selection. L2-42-180-215 is different: ratios 15/20/25/40: 800 Nm; 35/50: 1000 Nm; 100: 700 Nm.
Maximum Torque1.5 × rated output torqueDrawing-listed maximum; not a continuous-duty rating. Confirm allowable duration and duty cycle.
BacklashL1: ≤3 arcmin; L2: ≤5 arcminReference configurations only; accuracy may differ for other interfaces. L2-42-180-215 lists ≤6 arcmin.
Maximum Input Speed6000 rpmMaximum input speed; confirm duty cycle for the selected ratio.
Rated Speed3000 rpm (input)Rated input speed, not output speed.
EfficiencyL1: 95%; L2: 90%Reference configurations only; other interfaces may specify different efficiency. The 50 mm custom-output L2 drawing lists 92%.
Operating Temperature-10 to +90 °CDrawing-listed range for the reference configurations. L2-42-180-215 and the 50 mm custom-output drawing list -20 to +80 °C.
Maximum Axial Force7250 NDrawing-listed maximum; confirm combined loads and load position.
Maximum Radial Force14500 NDrawing-listed maximum; confirm combined loads and load position.
WeightL1: 28.5 kg; L2: 40 kgDrawing tolerance ±3%; motor interface and custom output change weight.
IP RatingIP65Reference configurations only. The L2-42-114.3-200 custom output (50 mm) is rated IP56.
Service Life20,000 hDrawing-listed value; actual life depends on load, speed, duty cycle and operating conditions.

Need a specification that is not listed? Contact us with the required configuration.

MOTOR INTERFACE FINDER

Find PLM180 drawings by motor interface

Select the motor interface and reduction stage to find the matching drawing and STEP model.

QUICK MATCH

Match your motor dimensions

Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.

Select Interface ResourcesAfter Publishing Engineering Resources, Filter by Actual Motor Dimensions.
Check the motor drawing for shaft diameter and length, keyway, pilot diameter, mounting hole spacing, threads and flange thickness.
ENGINEERING FILES

PLM180 drawings and STEP models

Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.

0 2D + 3D File
0 Interface / Stage Combinations
0 Complete Resource Set
Loading Resources…Choose a configuration to review the available files.
No matching configuration? Submit your motor drawing
DOWNLOAD CHECK

Check the configuration before downloading

Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.

Request Engineering Review
FAQ

Selection FAQ

PLM180 Can I Order by Model Number Alone?

First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.

Drawings and 3D How to Confirm Models?

Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.

What If My Specifications Are Incomplete?

Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.

Need help selecting a gearbox?

Send the required ratio, motor drawing, load and installation details for PLM180.

Generate RFQ
Need an OEM solution? Explore labels, packaging & interface customization
2D DRAWING PREVIEW

PLM180 Mounting Dimensions

PLM180 2D Mounting Drawing Preview

Download Original 2D Drawings

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.