PRECISION DRIVE
PLMX120 Right-Angle Disc-Flange Planetary Gearbox
The ANDANTEX PLMX120 right-angle planetary gearbox uses disc-flange output and a 22-110-145 motor interface.
Listed configurations provide 230–330 Nm rated output torque, depending on stage and ratio. L1 and L2 overall lengths are 206 mm and 236.5 mm. L1 ratio 3 has no rated torque in the supplied drawing and requires confirmation. Select using the stage-specific dimensions and engineering resources.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLMX Right-Angle Disc-Flange Output | Precision Planetary Gearbox |
| Specifications / Frame Size | 120 | Model Specifications |
| Output Structure / Flange Type | Right-angle disc-flange output; central bore 40 mm H7 | Outer flange diameter 145 mm; mounting PCD 135 mm with 8 x 5.5 mm through holes. Output connection PCD 63 mm with 10 x M6, depth 13.6 mm; locating hole 6 mm H7, depth 7 mm. Central bore is not a solid output shaft. |
| Gear Ratio | L1: 3, 4, 5, 7, 10; L2: 16, 20, 25, 28, 35, 40, 50, 70, 100 | L1 ratio 3 is shown without rated torque; confirm availability and rating before selection. No ratio 30 appears in the supplied L2 table. |
| Rated Output Torque | 230–330 Nm for listed rated configurations | L1: ratio 4 = 270 Nm; 5 = 330 Nm; 7 = 300 Nm; 10 = 230 Nm; ratio 3 unspecified. L2: 16/20/28/40 = 270 Nm; 25/35/50 = 330 Nm; 70 = 300 Nm; 100 = 230 Nm. |
| Maximum Torque | 1.5 x rated torque | — |
| Backlash | L1: ≤4–6 arcmin; L2: ≤7–9 arcmin (drawing notation) | Notation retained from drawings; confirm the exact limit for the required configuration. |
| Maximum Input Speed | 8000 rpm | — |
| Rated Speed | 4000 rpm | Rated input speed. |
| Motor Flange | 130 mm square; pilot 110 mm G7; PCD 145 mm | — |
| Efficiency | L1: 95%; L2: approx. 95% | — |
| Operating Temperature | −10 to +90 °C | — |
| Maximum Axial Force | 1250 N | — |
| Maximum Radial Force | 3100 N | — |
| Weight | L1: 9.8 kg; L2: 10.5 kg | Drawing tolerance ±3%. |
| Typical Interface | 22-110-145 | Input bore 22 mm F7; pilot 110 mm G7; PCD 145 mm; 4 x M8 x 20. Motor dimensions: shaft 22 x 57 mm; pilot 110 x 5 mm; 4 x 9 mm mounting holes. Overall length: L1 206 mm, L2 236.5 mm; overall height: L1 208 mm, L2 184.5 mm. |
| IP Rating | IP65 | — |
| Service Life | 20000 h | Drawing-stated value; operating conditions affect actual life. Synthetic grease; any mounting orientation; noise ≤68 dB. |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Find by Interface Dimensions PLMX120 Drawings
Choose the motor interface and reduction stage that match your configuration. Each drawing and STEP file applies to its stated variant.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Filter by motor type, reduction stage and the dimensions on your motor drawing. Matching configurations show their available drawings and STEP files; missing files are marked.
PLMX120 2D / 3D Engineering Resources
Choose the files for the exact model, motor interface and reduction stage. Dimensional drawings may be images or PDF; 3D models are STEP files.
Check the Model before Downloading, Size & Interface
Check the complete model and configuration against the approved engineering drawing. Custom inputs, outputs and flanges require their own matching files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Quote or Engineering Review?
Submit PLMX120 Gear Ratio for, Load & Installation Requirements.