Skip to content
ANDANTEX / PRECISION TRANSMISSIONSelection Support / 3D Resources / Custom Engineering

How Short Acceleration Times Affect a Gearbox?

The shorter the acceleration time, The higher the inertial torque, May trigger alarms, Shock Loads, Noise, Temperature rise or reduced service life

Key Takeaway:The shorter the acceleration time, The higher the inertial torque, May trigger alarms, Shock Loads, Noise, Temperature rise or reduced service life.

Why Acceleration Time Affects Torque?

Accelerating a load from rest requires overcoming rotational inertia. The shorter the acceleration time, The higher the required acceleration, And the greater the inertial torque.

How This Affects the Gearbox?

Peak torque limits may be exceeded, Gear Impact Loads, Higher Bearing Loads & Temperature Rise.

How to Optimize?

Allow longer acceleration and deceleration where cycle requirements permit, Then recheck peak torque and inertia matching.

How to Apply This Information to Selection?

Do not make a final selection from a single parameter. Review the motor model, Load, Target Output Speed, Torque, Inertia, Check acceleration/deceleration time and mounting interfaces together, Then select the series and model.

Related FAQ

Does the absence of servo alarms mean the gearbox is within its limits?

No. A servo drive can operate without an alarm while gearbox loads exceed the permitted limits. Check the gearbox torque, speed, load and duty conditions separately.

Read the related article
ENGINEERING SUPPORT

Need Help Applying This Information?

Send your application, motor details or drawing. The enquiry automatically records this article as its source.

Ask an EngineerBrowse Related Products2D / 3D Resources [STEP / PDF]
TECHNICAL DISCUSSION

Technical Questions & Discussion

Ask a technical question about this article. Names and questions may be published after review; email addresses are never displayed.

No published questions yet. Be the first to ask.

Leave a Technical Question

Required fields are marked *. Questions are reviewed before publication when comments are enabled.

KEEP READING

Gearbox Output Shaft Radial Load: A Timing-Belt Pulley Example

A timing pulley on a gearbox output transmits torque, but it also pulls sideways on the output shaft. That radial load acts on the shaft and its bearings.…

Read Article

How to Size an AGV Wheel-Drive Gearbox: A 600 kg Example

To size an AGV wheel-drive gearbox, start with the total moving mass, required vehicle speed, wheel diameter, slope and acceleration. Use those inputs to estimate wheel speed and…

Read Article

Hollow Shaft vs Solid Shaft Right-Angle Gearboxes: Which Output Fits Your Machine?

When choosing a right-angle gearbox, the output connection determines how the gearbox fits the machine and how the load reaches its bearings. A hollow output receives a mating…

Read Article

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.