PRECISION DRIVE
PLMX200 Right-Angle Disc-Flange Planetary Gearbox
The ANDANTEX PLMX200 is a right-angle planetary gearbox with disc-flange output.
The supplied L2 configurations cover ratios from 16 to 100 and rated output torque from 520 to 1200 Nm, depending on ratio. Available drawings show 35-114.3-200 and 28-130-165 motor interfaces. Compare the exact interface drawing before selecting a motor. Contact us for L1 dimensional review; its ratio and torque table requires clarification.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLMX Right-Angle Disc-Flange Output | Precision Planetary Gearbox |
| Specifications / Frame Size | 200 | Model Specifications |
| Output Structure / Flange Type | Right-angle disc-flange output; central bore 80 mm H7 | Outer mounting flange diameter 247 mm; outer mounting PCD 233 mm, 12 x 9 mm through holes. Output connection PCD 125 mm, 11 x M10 x 22.5 and one 10 mm H7 locating hole, depth 10 mm. Central bore is not a solid output shaft. |
| Gear Ratio | L2: 16, 20, 25, 28, 30, 35, 40, 50, 70, 100 | L2 ratio 16 is marked as a secondary choice. L1 ratio and torque entries are not listed here because the supplied table contains inconsistent model suffixes and ratio values. |
| Rated Output Torque | L2: 520–1200 Nm | L2 ratio 16/20/28: 1050 Nm; 25/30/35/40/50: 1200 Nm; 70: 1100 Nm; 100: 520 Nm. These values do not apply to L1. |
| Maximum Torque | 1.5 x rated torque | — |
| Backlash | L1: ≤4 arcmin; L2: ≤7–9 arcmin (drawing notation) | L2 notation retained as supplied; confirm the specified backlash limit for the selected configuration. |
| Maximum Input Speed | 6000 rpm | — |
| Rated Speed | 3000 rpm | Rated input speed. |
| Motor Flange | 35 mm input: 180 mm square; 28 mm input: 155 mm square | — |
| Efficiency | L1: approx. 95%; L2: 92% or 95%, depending on interface drawing | L2 35-114.3-200 drawing states 92%; L2 28-130-165 drawing states 95%. Values are not interchangeable. |
| Operating Temperature | −10 to +90 °C | — |
| Maximum Axial Force | 1250 N | — |
| Maximum Radial Force | 3100 N | — |
| Weight | L1: approx. 45.4 kg; L2: approx. 50.9 kg | Drawing tolerance ±3%. |
| Typical Interface | 35-114.3-200; 28-130-165 | 35 mm F7 input bore, 114.3 mm G7 pilot, PCD 200 mm, 4 x M12 x 30. Alternative L2: 28 mm F7 bore, 130 mm G7 pilot, PCD 165 mm, 4 x M10 x 25. |
| IP Rating | IP65 | — |
| Service Life | 20000 h | Drawing-stated value; actual life depends on operating conditions. Synthetic grease; any mounting orientation; noise ≤72 dB. |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Find by Interface Dimensions PLMX200 Drawings
Choose the motor interface and reduction stage that match your configuration. Each drawing and STEP file applies to its stated variant.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Filter by motor type, reduction stage and the dimensions on your motor drawing. Matching configurations show their available drawings and STEP files; missing files are marked.
PLMX200 2D / 3D Engineering Resources
Choose the files for the exact model, motor interface and reduction stage. Dimensional drawings may be images or PDF; 3D models are STEP files.
Check the Model before Downloading, Size & Interface
Check the complete model and configuration against the approved engineering drawing. Custom inputs, outputs and flanges require their own matching files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Quote or Engineering Review?
Submit PLMX200 Gear Ratio for, Load & Installation Requirements.