PRECISION DRIVE
PLX140 Flange-Output Planetary Gearbox | for Rack-and-Pinion Drives
The ANDANTEX PLX140 is a disc-flange-output planetary gearbox for rack-and-pinion drive applications.
Select an L1 or L2 configuration and match the motor shaft diameter, locating register and mounting PCD using the corresponding dimensional drawing. Published rated output torque is 380-700 Nm, depending on ratio and configuration. Interface-specific loads and dimensions must be checked against the selected drawing.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | PLX Disc-Flange Output Gearbox | Precision Planetary Gearbox |
| Specifications / Frame Size | 140 | Model Specifications |
| Output Structure / Flange Type | Disc-flange output; rotating flange diameter 100 mm | Output fastening PCD 80 mm, 11 x M8 depth 16 mm and one 8 mm locating hole. Housing register 140 mm; mounting PCD 168 mm with 12 x 6.6 mm through holes. |
| Confirmed Typical Applications | Rack-and-pinion drives | — |
| Gear Ratio | L1: 4, 5, 7, 10; L2: 20, 25, 28, 35, 40, 50, 70, 100 | Only ratios with documented rated torque are listed; confirm the selected interface. |
| Rated Output Torque | 380-700 Nm | L1: 4 = 550 Nm; 5/7 = 600 Nm; 10 = 380 Nm. L2: 20 = 650 Nm; 25/28/35/40/50/70 = 700 Nm; 100 = 460 Nm. |
| Maximum Torque | 1.5 x rated torque | — |
| Backlash | L1: <=3 arcmin; L2: <=3-5 arcmin | As stated in the corresponding stage drawing. |
| Maximum Input Speed | 4500-6000 rpm | Range stated in the supplied drawings; confirm the permitted operating point for the selected ratio. |
| Rated Speed | 2300-4200 rpm | Range stated in the supplied drawings; confirm the permitted operating point for the selected ratio. |
| Efficiency | 95% | Both supplied L1 and L2 drawings state 95%. |
| Operating Temperature | -20 to +80 C | — |
| Maximum Axial Force | 1250 N | — |
| Maximum Radial Force | 3100 N | As stated in the supplied drawing. |
| Weight | L1: 7.1 kg; L2: 9.5 kg | Drawing values, tolerance +/-3%. |
| Typical Interface | 35-114.3-200 | Notation: input shaft diameter - motor locating register - motor mounting PCD, in mm. |
| IP Rating | IP65 | — |
| Service Life | 20000 h | Drawing-stated service life; actual life depends on operating conditions. |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Find by Interface Dimensions PLX140 Drawings
Choose the motor interface and reduction stage that match your configuration. Each drawing and STEP file applies to its stated variant.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Filter by motor type, reduction stage and the dimensions on your motor drawing. Matching configurations show their available drawings and STEP files; missing files are marked.
PLX140 2D / 3D Engineering Resources
Choose the files for the exact model, motor interface and reduction stage. Dimensional drawings may be images or PDF; 3D models are STEP files.
Check the Model before Downloading, Size & Interface
Check the complete model and configuration against the approved engineering drawing. Custom inputs, outputs and flanges require their own matching files.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Quote or Engineering Review?
Submit PLX140 Gear Ratio for, Load & Installation Requirements.