PRECISION DRIVE1.0KW 80 Flange 3000RPM 3.3NM EtherCAT AC Servo Motor
Review the ANDANTEX 1.0kW 80 Flange 3000RPM 3.3Nm EtherCAT AC Servo Motor: product specifications, available engineering resources and selection information for your application.
1.0KW 80 Flange 3000RPM 3.3NM EtherCAT AC Servo Motor
Review the ANDANTEX 1.0kW 80 Flange 3000RPM 3.3Nm EtherCAT AC Servo Motor: product specifications, available engineering resources and selection information for your application.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | EtherCAT Bus Type | AC Servo Motor |
| Rated Torque | 3.3 Nm | Current Size Designation |
| Rated Speed | 3000 rpm | Current Size Designation |
| Rated Power | 1.0W | Based on the Current Size Designation |
| Motor Flange | 80 mm | Mounting Flange Size |
Unlisted Specifications Are Pending, Confirm for the Specific Configuration.
Specifications / Gear Ratio
Ratio Information for This Model Is Pending
Gear Ratio, Confirm Stages & Interface Using the Required Configuration and Official Drawing.
Find by Interface Dimensions 1.0KW 80 Flange 3000RPM 3.3NM Drawings
The Same Model Can Store Separate Servo, Stepper, Custom and Different L1/L2 Configurations; Options Expand Automatically as Engineering Resources Are Published.
Enter Motor Shaft Diameter, Pilot Diameter & Mounting Hole Spacing, Find identical or similar input interfaces across recorded models; Resources Requiring Review Are Clearly Marked.
Match Using Dimensions on the Motor Drawing
Select the Motor Type in Order, Stages, Shaft Diameter, Pilot Diameter & Hole Spacing; Results Are Listed by Interface 2D Drawings and 3D STEP, Missing Files Are Marked as Pending.
1.0KW 80 Flange 3000RPM 3.3NM 2D / 3D Engineering Resources
Each Standard Size, Motor Interface & Custom Combination Is Managed Separately 2D Drawing and 3D STEP; 2D Supports Images and PDF.
Check the Model before Downloading, Size & Interface
Use the Current Order Model & Official Engineering Drawing; Custom Input, Outputs & Flanges Require Their Own Resources.
Application Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Quote or Engineering Review?
Submit 1.0KW 80 Flange 3000RPM 3.3NM Gear Ratio for, Load & Installation Requirements.