High Inertia 400W 60 Flange 3000RPM 1.27NM Standard AC Servo Motor
View specifications, mounting dimensions and available engineering files for the High Inertia 400W 60 Flange 3000RPM 1.27Nm Standard AC Servo Motor.
Review rated power, torque and speed below, then check motor mounting dimensions and servo-drive compatibility.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | Standard Type | AC Servo Motor |
| Rated Torque | 1.27 Nm | Current Size Designation |
| Rated Speed | 3000 rpm | Current Size Designation |
| Rated Power | 400W | Based on the Current Size Designation |
| Motor Flange | 60 mm | Mounting Flange Size |
Need a specification that is not listed? Contact us with the required configuration.
Motor Mounting and Drive Compatibility
Select the motor and servo drive as a pair. Confirm the supply voltage, rated current, feedback or encoder, brake requirement and control interface using the exact model documents.
When connecting a gearbox, check the motor shaft diameter and usable length, keyway, locating pilot, mounting hole pattern and flange dimensions. Rated power or flange size alone does not confirm mechanical fit.
Motor Drawings and Technical Documents
No model-specific engineering files are published for this motor specification yet. Request the dimensional drawing and motor/drive documentation for the exact configuration before confirming compatibility.
Request Motor DocumentsApplication Verification
Provide the Load, Target Output Speed, Start/Stop Cycle, Installation Space & Operating Environment, Confirm Whether This Model Is Suitable.
View ApplicationsFAQ
How to Verify the Motor Interface?
Check Motor Shaft Diameter, Shaft Length, Keyway, Pilot Diameter & Mounting Hole Locations, Use the Official Drawing for the Matching Configuration.
What If Specifications or Drawings Are Unavailable?
Submit the Model & Required Configuration for Engineering Review, Unpublished resources do not mean the configuration has been verified.
Need a Motor Quote or Compatibility Review?
Send the motor specification, required quantity, load and speed requirements, and the intended servo drive. Include the motor drawing when available.
Request a Motor Quote