YT25 Harmonic Reducer
View specifications, mounting dimensions and available engineering files for the YT25 Harmonic Reducer.
Review the technical specifications below, then select the motor interface and engineering files for your configuration.
Key Technical Specifications
| Item | Parameters | Description |
|---|---|---|
| Product Series | YT Harmonic Reducer | Harmonic Reducer |
| Specifications / Frame Size | 25 | Model Specifications |
| Gear Ratio | 50 / 80 / 100 / 120 | Torque Varies by Ratio, See the Original 2D Specification Table |
| Rated Output Torque | 39–67 Nm | Gear Ratio: 50=39, 80=63, 100/120=67 Nm; Drawing Conditions: Input 2000 r/min |
| Maximum Torque | 186–304 Nm | Drawing Annotation " Maximum Momentary Allowable Torque ", Not a Continuous Operating Rating |
| Backlash | ≤20 arcsec | The Original Unit Is Arcseconds, Do Not Confuse with Arcminutes Used for Planetary Gearboxes |
| Maximum Input Speed | 5600 rpm | Maximum Allowable Input Speed Specified in the Drawing ( Grease Lubrication) |
| Allowable Average Input Speed | 3500 rpm | This Is the Allowable Average Input Speed ( Grease Lubrication), Not the Rated Output Speed |
| Weight | 1.46 kg | Component Weight Listed in the Drawing; Check Other Combinations against the Actual Configuration |
Need a specification that is not listed? Contact us with the required configuration.
YT25 Mounting Interface Verification
For Harmonic Reducers, Verify the Wave Generator-to-Motor Connection, Output Hole Locations & Housing Pilot Dimensions.
First Check This Model's Published 2D Resources; For Other Structures or Connection Options, Search the Website Interface Library by Dimensions.
YT25 Product Catalogs & Manuals
Download catalogs and manuals applicable to this product. For mounting dimensions and CAD models, see the 2D / 3D section below.
YT25 drawings and STEP models
Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.
Check the configuration before downloading
Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.
Selection FAQ
YT25 Can I Order by Model Number Alone?
First confirm the gear ratio, Load, Output Speed, Mounting orientation and motor interface. The same frame size may have different interfaces and configurations.
Drawings and 3D How to Confirm Models?
Find resources on this page or in the Download Center, Confirm the final version against the motor interface and machine mounting dimensions.
What If My Specifications Are Incomplete?
Provide the Motor Model, Load, Target Speed, Required Torque, Cycle Time & Installation Space, Our engineers can help confirm the requirements.
Need help selecting a gearbox?
Send the required ratio, motor drawing, load and installation details for YT25.


