Skip to content

PAG120 Helical Planetary Gearbox | for Motion Control

The ANDANTEX PAG120 is a 120 mm square-flange helical planetary gearbox for rack-and-pinion drives and ball-screw modules.

ANDANTEX PRODUCT

L1 and L2 configurations offer a 32 mm keyed output shaft and multiple motor interfaces. Separate drawings cover extended output shafts, input depths and keyway options. Match the drawing, ratio and motor dimensions before ordering; performance values vary by configuration.

PAG120 Product Model
PAG Square-Flange Helical Gearbox Product Series
L1: 3, 4, 5, 7, 8, 10; L2: 12, 15, 20, 25, 28, 30, 35, 40, 50, 70, 100 Gear Ratio
165–230 Nm Rated Output Torque
L1: ≤3 or ≤5 arcmin; L2: ≤5 or ≤7 arcmin Backlash
6700 N Maximum Radial Force
6000 or 8000 rpm Maximum Input Speed
L1: 95% or 97%; L2: 90% or 94% Efficiency

Key Technical Specifications

AND-PD-PAG120-001 Technical Data SheetPAG Square-Flange Helical GearboxPrecision Planetary Gearbox
ItemParametersDescription
Product SeriesPAG Square-Flange Helical GearboxPrecision Planetary Gearbox
Specifications / Frame Size120Model Specifications
Output Structure / Flange TypeInline square-flange output with 32 mm keyed shaft120 mm output flange; standard shaft extension 50 mm, with separate 90 mm custom versions.
Confirmed Typical ApplicationsRack-and-pinion drives; ball-screw modulesSelect the motor interface, ratio and torque for the actual duty cycle.
Gear RatioL1: 3, 4, 5, 7, 8, 10; L2: 12, 15, 20, 25, 28, 30, 35, 40, 50, 70, 100Not every ratio is listed for every interface; consult the selected drawing.
Rated Output Torque165–230 NmRatio- and configuration-dependent; use the torque table on the selected drawing.
Maximum Torque1.5 × rated output torqueConfirm the selected configuration.
BacklashL1: ≤3 or ≤5 arcmin; L2: ≤5 or ≤7 arcminSelect the required accuracy and interface before ordering.
Maximum Input Speed6000 or 8000 rpmDrawing-specific maximum; confirm the selected configuration and duty cycle.
Rated Speed3000 rpm; 4000 rpm on L1 24-95-115 drawingRated input speed varies by drawing.
EfficiencyL1: 95% or 97%; L2: 90% or 94%Use the value on the selected configuration drawing.
Operating Temperature-10°C to +90°CConfirm the selected configuration.
Maximum Axial Force3000 NVerify combined loading for the application.
Maximum Radial Force6700 NVerify load position and duty cycle.
WeightL1: 8.5 kg; L2: 12 kgSource values with ±3% tolerance; custom long-shaft weight requires confirmation.
Typical Interface16-80-100; 19-55.5-125.9; 19-95-115; 19-95-130; 22-110-145; 22-95-115; 24-110-145; 24-95-115; 28-110-145Check stage availability, thread depth, input depth, keyway and custom output length separately.
IP RatingL1: IP65; L2: IP56Confirm the required rating when ordering.
Service Life20000 hSource drawing value; subject to operating conditions.

Need a specification that is not listed? Contact us with the required configuration.

MOTOR INTERFACE FINDER

Find PAG120 drawings by motor interface

Select the motor interface and reduction stage to find the matching drawing and STEP model.

QUICK MATCH

Match your motor dimensions

Filter by motor type, reduction stage and mounting dimensions. Open the available files, or request the format you need.

Select Interface ResourcesAfter Publishing Engineering Resources, Filter by Actual Motor Dimensions.
Check the motor drawing for shaft diameter and length, keyway, pilot diameter, mounting hole spacing, threads and flange thickness.
ENGINEERING FILES

PAG120 drawings and STEP models

Choose your configuration below. Use the 2D drawing to check dimensions and the STEP model to check fit in your assembly.

0 2D + 3D File
0 Interface / Stage Combinations
0 Complete Resource Set
Loading Resources…Choose a configuration to review the available files.
No matching configuration? Submit your motor drawing
DOWNLOAD CHECK

Check the configuration before downloading

Match the model, reduction stage and motor interface to the drawing. Custom input or output dimensions require a separate set of files.

Request Engineering Review
FAQ

Selection FAQ

PAG120 Can I Select by Motor Power Alone?

No. Also consider the output speed, Load Torque, Peak Torque, Inertia, Confirm acceleration/deceleration time and motor interface together.

How to Verify the Motor Interface?

At minimum, check shaft diameter, Shaft Length/Keyway, Pilot Diameter & Mounting Hole Spacing, Confirm threads and flange thickness when necessary.

2D / 3D How to Obtain Resources?

Open the current resource page from the engineering resources section; For actual projects, confirm the final drawing version for the specific motor interface.

Need help selecting a gearbox?

Send the required ratio, motor drawing, load and installation details for PAG120.

Generate RFQ
2D DRAWING PREVIEW

PAG120 Mounting Dimensions

PAG120 2D Mounting Drawing Preview

Download Original 2D Drawings

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.