PRECISION DRIVE
Home / Applications / Woodworking Feed Axis
WOODWORK
Woodworking Feed Axis
PLM090-7 or PAW090-7 + 750W Servo, Check Shock Loads & Dusty Environments.
Motor 750W Servo
Recommended Model PLM090-7 / PAW090-7
Key Parameters Shock Load / Protection
Operating Conditions Continuous Feeding / Dusty Environment
WORKING CONDITIONS
What Matters Most When Selecting for This Application?
- Feed axes require stable linear speed, Loads may change suddenly as material enters the cutting area.
- In dusty woodworking environments, pay attention to sealing, Protection & Long-Term Lubrication.
- For Lower Noise, And Smoother Transmission, Consider a Helical Precision Planetary Series.
CONTACT
Location & Contact
Dongguan Hanrui Automation Technology Co., Ltd.
6th Floor, No. 172 Chonghuan Middle Road, Shijie Town, Dongguan, China
Phone: +86 769 8281 3091
Email: oliver@andantexcn.com
WHY THIS STRUCTURE
Why This Transmission Structure Is Recommended?
PLM Belongs to the Square-Flange Helical Series, Suitable for Higher Rigidity & Lower Noise Requirements
Smoother transmission helps control feed fluctuations, Actual Accuracy Also Depends on Rollers, Guides & Resistance from the Material.
7:1 This Example Balances Feed Speed & Torque
Maintains a Useful Feed Speed, While Increasing Resistance to Load; Check Peak Torque against Maximum Cutting Resistance.
750W Servo Motors Suit Small & Medium Woodworking Feed & Positioning Axes
A Typical Power Rating Helps Initial Selection, Final Selection Must Still Consider Roller Diameter, Clamping Force & Acceleration Time.
SELECTION CHECKLIST
Information to Include in Your Selection Request
LoadWeight, Dimensions, Lever Arm, Center of Gravity
MotionTarget Speed, Angle, Travel, Acceleration & Deceleration Time
Cycle TimeTime per Cycle, Start/Stop Frequency, Daily Operating Hours
AccuracyPositioning Accuracy, Repeatability, Allowable Backlash
MotorPower, Model, Shaft Diameter, Shaft Length, Pilot Diameter, Hole Spacing
InstallationSpace, Orientation, Radial/Axial Force, Offset Load