PRECISION DRIVE
Standard Planetary Gearboxes and Gear Reducers
Compare ANDANTEX standard planetary gearbox series by flange form, right-angle layout and output connection. Start with the machine arrangement, then check ratio, torque, motor interface and model drawings.
Product Series
← BackProductsPLF Square-Flange Spur Gearbox
7 Published Models
View ModelPLE Round-Flange Spur Gearbox
6 Published Models
View ModelPVEA Right-Angle Round-Flange Gearbox
3 Published Models
View ModelPVFA Right-Angle Square-Flange Gearbox
3 Published Models
View ModelPBF Square-Flange Hollow-Output Gearbox
4 Published Models
View ModelPBE Round-Flange Hollow-Output Gearbox
4 Published Models
View ModelPVBF Right-Angle Square-Flange Hollow-Output Gearbox
3 Published Models
View ModelWhich Standard Planetary Gearbox Series Should You Review?
Use the series descriptions below to narrow the mechanical arrangement. A matching flange shape is only a starting point; verify the motor interface, output dimensions and operating requirements for the exact model.
| Series | Catalog configuration | Check before selection | Next step and resource status |
|---|---|---|---|
| PLF | Square-flange spur gearbox | Flange dimensions, output connection and motor interface | 7 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
| PLE | Round-flange spur gearbox | Mounting pilot, bolt pattern and motor interface | 6 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
| PVFA | Right-angle square-flange gearbox | Installation envelope, mounting orientation and output connection | 3 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
| PVEA | Right-angle round-flange gearbox | Installation envelope, mounting pilot and bolt pattern | 3 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
| PBF | Square-flange hollow-output gearbox | Mating shaft dimensions and specified output connection | 4 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
| PBE | Round-flange hollow-output gearbox | Mating shaft dimensions, mounting pilot and bolt pattern | 4 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
| PVBF | Right-angle square-flange hollow-output gearbox | Available model configuration, mating shaft and installation envelope | 3 published models. Review model-specific resources; file availability varies by configuration. View models and resources |
Open a series to review available models and resources. Confirm any configuration that does not yet have published model data before ordering.
Match the Arrangement, Then Check the Duty
- Layout and output: compare the required mounting arrangement with the series drawing. For a hollow output, confirm the mating shaft and connection details; do not assume a particular keyway or clamping design.
- Ratio and speed: provide motor speed and the required output speed, then review the available ratios for the selected model.
- Load and cycle: check torque, inertia, acceleration/deceleration and start-stop frequency together. Motor power alone does not establish gearbox suitability.
- Motor interface: compare shaft diameter, usable shaft length, locating pilot and mounting holes against the exact motor and gearbox drawings.
For the selection workflow, read planetary gearboxes for servo motors: series and selection. Use the motor interface dimensions checklist to prepare the mechanical information.
Need Help Matching a Series to Your Machine?
Send the complete motor model, motor drawing, required ratio or output speed, load information and installation arrangement. Include the required output connection so the proposed model can be checked against the machine interface.