Skip to content
ANDANTEX / PRECISION TRANSMISSIONSelection Support / 3D Resources / Custom Engineering

Why Low Backlash Does Not Guarantee High Positioning Accuracy?

Positioning accuracy also depends on structural rigidity, Coupling, Encoder, Ball Screw, Load Deflection & Control Settings

Key Takeaway:Positioning accuracy also depends on structural rigidity, Coupling, Encoder, Ball Screw, Load Deflection & Control Settings.

Backlash Is Only One Source of Error

Gearbox backlash affects reversal error, But the complete machine has other mechanical and control errors.

Rigidity Matters Too

Changing loads can deflect shafts, Brackets, Couplings and gearboxes elastically. Even with very low backlash, Insufficient rigidity can still cause positioning errors.

The Control System Also Affects the Result

Encoder Resolution, Servo Gain, Compensation settings and mechanical friction affect final positioning.

How to Apply This Information to Selection?

Do not make a final selection from a single parameter. Review the motor model, Load, Target Output Speed, Torque, Inertia, Check acceleration/deceleration time and mounting interfaces together, Then select the series and model.

Related FAQ

Does P0 guarantee better machine positioning accuracy than P2?

A lower gearbox backlash value alone does not guarantee better machine positioning accuracy. The complete mechanical and control system determines the result.

Read the related article
ENGINEERING SUPPORT

Need Help Applying This Information?

Send your application, motor details or drawing. The enquiry automatically records this article as its source.

Ask an EngineerBrowse Related Products2D / 3D Resources [STEP / PDF]
TECHNICAL DISCUSSION

Technical Questions & Discussion

Ask a technical question about this article. Names and questions may be published after review; email addresses are never displayed.

No published questions yet. Be the first to ask.

Leave a Technical Question

Required fields are marked *. Questions are reviewed before publication when comments are enabled.

KEEP READING

Planetary Gearbox Torque Calculator: Ratio, Efficiency and Speed

Estimate gearbox output torque and speed from motor torque, reduction ratio and efficiency. Includes formulas, a worked example and model-rating checks.

Read Article

Stepper Motor Speed and Pulse Frequency: Formulas and Examples

Calculate stepper motor RPM from pulse frequency, step angle and microstep setting. Work through a 1.8-degree example and check gearbox output speed.

Read Article

What Does the Planet Carrier Do in a Planetary Gearbox?

A planet carrier supports the planet gears and locates their pins around the sun gear. In a common planetary reduction arrangement with the ring gear fixed and the…

Read Article

ANDANTEX Product search

Catalogue guide · Beta
Guided catalogue search by model code — not AI chat. Searches are not stored.